Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
Would a 6x6x8h grow tent with a 6inch hole in the bottom on one side for air intake(no fan?) with a few feet of ducting
and on the opposite side of the tent level with lights a 6inch exhaust with insulated ducting then a 6inch carbon filter then a 6inch inline fan with possibly a 6inch ducting muffler all exhausting into the ceiling or outside
Would this work? What to add? Any feedback appreciated
Sorry for the slow reply back, did a bit more reading and I think I figured it out. I will probably need an intake fan + exhaust fan if I'm going to be pulling through a carbon filter. Ditching the muffler, should be fine without. Intaking from the grow room/under the door and exhausting through the floor or ceiling.
Threaded
Previous
Index
Next
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
