Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
i have 3 computer fans i'm about to install for my stealth grow...one pulling air in, 2 pushing out. my question is....is there a way i can connect these all to one power supply? and its sort of a stupid question, but how to i power these fans with these 2 red and black wires? do they connect to a battery or to a cord? thanks for any help...
You'll need to find the voltage of your fans, and then find an AC adapter that is the same voltage (or lower, never higher). Many people have old cellphone chargers they like to use.
You'll need to strip the wires on the ac adapter as well as your fan. Splice them together (aka, twist the wires together). MAKE SURE THE RED SIDE WIRES DON'T TOUCH THE BLACK SIDE WIRES. If it doesn't start, switch the wires.
Once its working, tape each individual side together, then tape both together once all the wires are covered. Use electrical tape.
Fuck, this is pretty confusing to read, isn't it? I should make a video.
-------------------- Of course it's happening inside your head.
Why should that mean it isn't real?
Computer fan run on 12v, And yes you should be able to use any random AC to DC 12v converter from a cellphone charger or whatever electronic device you no longer need. Make sure its at least 1 or two amps depending on what kind of fans you want
Alternatively if the fans run loud at full speed since this is going to be a "stealth" grow, you could find a charger from something that takes say 7 or 8 volts
Ill draw you up a little diagram in paint in a minute showing you how to wire it up, its very simple
Just out of curiosity though can you post the brand and or model numbers of the fans you are going to be using
-------------------- Glass By: US Tubes, ZOB, Roor.de, Sheldon Black, Jerome Baker, Medicali, Kennaroo, Sand, Alex K, Local and Unknown Artists
Maybe this only applies to other devices, but I thought that the milliamps were what was important when finding an electrical supply. 1-2 amps of power is a fuck ton, but if you're running 3 fans off of one supply it might be necessary.
What you need to do is find out the voltage the fans run at (should be 12) and then how many millamps and watts the fan draws. If all the fans are the same just multiply the mA by the number of fans you want to run on one supply to get the total number of mA/Amps you need to power the fans.
Power: 4.8W Voltage: 12V DC Current: 0.4A
So, if your fans have the above specs you would need
1 Power supply that is rated for 12V DC, 1.2 Amps, and 14.4 watts to run three fans (.4 * 3 = 1.2, 4.8 * 3 = 14.4).
Hopefully this helps a little, I'm no master electrician but it's not hard to wire up some CPU Fans
i would like somebody's input...i'm doing a stealth grow in a dresser. a very small dresser too...i have 2' height, 2' width, and 18" depth. the strain i'm growing is blue himalaya diesel. should i get just one 125 watt light, or several 26 watts of different spectrums. what will be best for being the coolest. temperature is my major concern givin the small and enclosed space.
they dont pull much pressure though, so dont plan on running these to move the air through a carbon filter, for any fan to have a good amount of pressure its going to be loud, and most likely not going to be a DC fan, most powerful fans run on 110 AC
-------------------- Glass By: US Tubes, ZOB, Roor.de, Sheldon Black, Jerome Baker, Medicali, Kennaroo, Sand, Alex K, Local and Unknown Artists
Threaded
Previous
Index
Next
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
