|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 lothario
Registered: 02/05/09
Posts: 17
Last seen: 12 years, 8 months
|
 DIY Aero Construction started 
#231818 - 05/25/09 04:40 PM (15 years, 6 months ago) |
|
|
So I though I'd share my project with everybody since I'm sure it will help somebone. The plan is to build an aeroponic system designed for a 1000 watt hps lamp.
I started off by cutting two 4ft sections of 2 by 4 and clamping them together side by side. Then I drilled pilot holes. I then drilled out four 4 1/2in holes and three 15/16in holes.
Then I cut eight 2ft sections of 2 by 4 and made these little sawhorse legs.
Then I cut my two 10ft 4in pvc pipes in half to make four 5ft sections and put them on the stands.
As you can see the other notches are going to be for the feeder pipes.
Well this is the first installment and I will update as I progress. I have most of the supplies I need but it will take me some time due to a very busy schedule.
peace,
Lothario
|
Tripp420
WAT?
Registered: 07/06/08
Posts: 4,186
Last seen: 9 years, 6 months
|
 Re: DIY Aero Construction started [Re: lothario]
#231838 - 05/25/09 05:55 PM (15 years, 6 months ago) |
|
|
what kind of misters are you going to use?...
--------------------
|
 Dr. Siekadellyk
Question Everything!
Registered: 04/20/09
Posts: 9,365
Loc: Ketamine 
|
Re: DIY Aero Construction started [Re: Tripp420]
#231841 - 05/25/09 06:02 PM (15 years, 6 months ago) |
|
|
good job so far!
--------------------
The Kratom Report...
Edited by Dr. Siekadellyk (05/25/09 06:04 PM)
|
lothario
Registered: 02/05/09
Posts: 17
Last seen: 12 years, 8 months
|
Re: DIY Aero Construction started [Re: Tripp420]
#231894 - 05/25/09 08:39 PM (15 years, 6 months ago) |
|
|
Hey Thanks!
Quote:
Tripp420 said:
what kind of misters are you going to use?...
I'm going to use the Aeroponic Microjet 360° Sprayers
The green one. The blue one is the 180° Sprayer
|
Tripp420
WAT?
Registered: 07/06/08
Posts: 4,186
Last seen: 9 years, 6 months
|
Re: DIY Aero Construction started [Re: lothario]
#231930 - 05/25/09 10:35 PM (15 years, 6 months ago) |
|
|
very nice!....
--------------------
|
FurrowedBrow
Free yourself from yourself
Registered: 04/20/08
Posts: 12,045
Loc: Carpal Tunnel
|
Re: DIY Aero Construction started [Re: Tripp420]
#233183 - 05/27/09 08:52 PM (15 years, 6 months ago) |
|
|
nice! Keep us posted!
|
Dr. Penguin
Registered: 05/19/08
Posts: 1,036
|
Re: DIY Aero Construction started [Re: FurrowedBrow]
#235993 - 06/03/09 03:22 PM (15 years, 5 months ago) |
|
|
Wow, keep the updates coming! 
|
lothario
Registered: 02/05/09
Posts: 17
Last seen: 12 years, 8 months
|
 Re: DIY Aero Construction started [Re: Dr. Penguin]
#237242 - 06/07/09 03:48 PM (15 years, 5 months ago) |
|
|
Ok a few updates!
First of all I've decided to just have two 3/4" main feeder pipes instead of three. Each pipe will feed two 4 inchers.
So for each main feeder pipe assembly I cut 3/4" pvc into 4 pieces 10 7/8" and 5 pieces 1 7/8". I used ten 3/4" tee's and ten bushings 3/4" slip by 1/2" FPT (Female Pipe Thread).
I arranged them to make 5 smaller assemblies like this per feeder pipe.
Here it is a bit further back.
They will go in between the main pipes like this
I have these brass tee's that will thread on either side of those assemblies. They're called Male Branch Tees' that are 1/8" NPT that will get me down to the 1/4 in tubing that I will use for the spray jets.
I can't thread them in yet because I'm waiting for the 1/8" FPT by 1/2" MPT brass bushings that will go between the pvc bushing and the male branch tee's.
So soon I will take care of the plumbing from the pump to the feeder pipes, finish off the spray jet plumbing, and work on drainage.
I also will be using 2" net pots and 2" neoprene collars with no medium.
Cool well I hope you're enjoying so far. We've got a loooong way to go. Well not too long I hope. I do have some obstacles to overcome as far as the room itself, electrical and whatnot but that should get taken care of as well.
Later,
Loth
|
Dr. Penguin
Registered: 05/19/08
Posts: 1,036
|
Re: DIY Aero Construction started [Re: lothario]
#240115 - 06/16/09 11:18 AM (15 years, 5 months ago) |
|
|
Are you done yet?!?! I want more! 
|
Oatman2000
-=Outa Space=-
Registered: 03/05/09
Posts: 203
Loc: Planetary Nebula
Last seen: 12 years, 10 months
|
Re: DIY Aero Construction started [Re: Dr. Penguin]
#243454 - 06/27/09 01:09 PM (15 years, 5 months ago) |
|
|
Yes, this construction is very interesting, what's the updates?
--------------------
 Spawning to COIR
Building a flood table out of 2 kiddie pools
 Ebb and Gro - Buckets 2000w
----------------------------
4-PO-DMT; 4-phosphoryloxy-N,N-dimethltryptamine
|
lothario
Registered: 02/05/09
Posts: 17
Last seen: 12 years, 8 months
|
Re: DIY Aero Construction started [Re: Oatman2000]
#243552 - 06/27/09 04:00 PM (15 years, 5 months ago) |
|
|
Yeah sorry guys I've been suuuuuper busy. However I have made some progress.
Here's what it's looking like these days.
A top view of the connections
Part of the drainage
And the backside
I don't have time to go into details but I promise I will come back and give a detailed explanation. There's some cool stuff built into this. If you have any questions just ask and I'll answer them.
Later,
Loth
|
SativaSam
Registered: 06/29/09
Posts: 66
Last seen: 14 years, 7 months
|
Re: DIY Aero Construction started [Re: lothario]
#244024 - 06/29/09 09:09 AM (15 years, 4 months ago) |
|
|
there s a june article in HT, giving complete part lists for this nft gulley system, I built one just like yours with the pvc pipes, big pain in the ass when it comes to drilling your plant sites. the name of the article is how to grow a lb every three weeks.instead of using round pcv, the person uses 4x4 pvc decking, you would use to cover a wooden 4x4 post, a hollowed out sq, much easier to work with. there is another thread on this site, with a detailed set of instructions, and even has a pdf file with a diagram, ill find out where i found itand link it over somehow
--------------------
In every seed, there is a bag of weed!
P.S. if you don't own a copy of Marijuana Horticulture, the indoor/outdoor medical growers bible, you need to get a copy!
|
lothario
Registered: 02/05/09
Posts: 17
Last seen: 12 years, 8 months
|
Re: DIY Aero Construction started [Re: SativaSam]
#245726 - 07/03/09 12:17 PM (15 years, 4 months ago) |
|
|
Quote:
SativaSam said:
there s a june article in HT, giving complete part lists for this nft gulley system, I built one just like yours with the pvc pipes, big pain in the ass when it comes to drilling your plant sites. the name of the article is how to grow a lb every three weeks.instead of using round pcv, the person uses 4x4 pvc decking, you would use to cover a wooden 4x4 post, a hollowed out sq, much easier to work with. there is another thread on this site, with a detailed set of instructions, and even has a pdf file with a diagram, ill find out where i found itand link it over somehow
Why do you say posts are easier to work with? Pvc is cheaper, easier to find and if you get a good hole saw you should be ok to drill so long as your careful. Also this is aero not nft. It does have an nft quality to it but its secondary to the spray jets. This will grow faster than nft.
|
azshroomer
Medical Marijuana Cultivator
Registered: 05/01/09
Posts: 464
Loc: Nor-Cal
Last seen: 14 years, 3 months
|
Re: DIY Aero Construction started [Re: lothario]
#251194 - 07/18/09 06:01 PM (15 years, 4 months ago) |
|
|
He is talking about PVC posts.
And you are actually building an Aero/NFT system, whether you know it or not.
The square PVC posts have all the benefits of a PVC tube, but with added rigidity of a square and the benefit of being able to have a flush fit on the post and your net pots.
Check out my Aerocloner and soon to be aero-veg and aero-flower system threads.
Also be aware you will have roots coming out the drain holes. They get LOOOOOOOOOOOOOOOOOOONG.
--------------------
Check out my Grow The Growery teks!
 Building Your Grow Room
Make Your Own Aeroponic Cloner
Make Your Own Aeroponic Veg System
Make Your Own True Grow Room
Make Your Own Aeroponic Flower System (COMING SOON)
|
SativaSam
Registered: 06/29/09
Posts: 66
Last seen: 14 years, 7 months
|
Re: DIY Aero Construction started [Re: azshroomer]
#251422 - 07/19/09 02:59 PM (15 years, 4 months ago) |
|
|
thanks for the follow up on this thread shroomer, nft/areo is correct! no matter nft and areo, its fun to build and maintenance, and yes i was referring to the sq pvc post, which is about the same price in my area.
--------------------
In every seed, there is a bag of weed!
P.S. if you don't own a copy of Marijuana Horticulture, the indoor/outdoor medical growers bible, you need to get a copy!
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
