Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 funky
Smoker
Registered: 10/13/14
Posts: 195
Last seen: 3 years, 2 months
|
 led boost driver 
#821389 - 11/23/16 09:34 AM (8 years, 28 days ago) |
|
|
I was on ebay earlier and saw this driver link
I was wondering if anyone has ever used one and your thoughts on it? I have a 200w 12v power supply I'm trying to use to drive a
Vero 29 or other cob . Either way I ordered one so if no one has tried it, I'll post back up with a little review on it.
|
 phychotron
Medicated
Registered: 02/17/11
Posts: 1,995
Loc: Earth (mostly) 
|
Re: led boost driver [Re: funky]
#821393 - 11/23/16 11:34 AM (8 years, 28 days ago) |
|
|
Strange that a DC-DC converter cost as much as an AC driver with power source. Its hard to say if it will have the voltage/current that you want as it depends on the input source. I know from experience that my 12V truck does not light up LED's the same as when I use a 12V source from the wall. They both use a DC-DC converter (flashlight driver)
Find out the amount of CURRENT the diodes likes to be driven at, get a CONSTANT CURRENT driver. Match the VOLTAGE output of the driver to the sum of the diodes's voltages (i.e three 3v diodes need a 9v power supply, four =12v, etc). Don't overdo it. You will find a voltage range that the diodes use, calculate the upper limit and lower limit and shoot for in-between. The Voltage will adjust according to the load on the driver.
--------------------
Any help given is for educational purposes only. Its your responsibility not to break any applicable laws
 Bamboo Bongs I make | Perfect Dry and Cure | Grapegod under LED
“Human beings, vegetables, or cosmic dust, we all dance to a mysterious tune intoned in the distance by an invisible player.” ~ Albert Einstein
|
funky
Smoker
Registered: 10/13/14
Posts: 195
Last seen: 3 years, 2 months
|
Re: led boost driver [Re: phychotron]
#821401 - 11/23/16 02:43 PM (8 years, 28 days ago) |
|
|
Yeah the price is high but it's somewhat enclosed an has a screen with the current an voltage. I'm putting together a light from mostly spare parts I have laying around for vegging . I have some 20w cobs left from a old led fixture I built for my reef tank 14k an actinic hybrids that I was going to use but I think a Vero 29 would work better.
The 20w cobs I have are 9-11v 2000ma the Vero I was looking at run 50v 2100ma , the power supply is for a Xbox 360 I use it to run random 12v stuff I'm messing with . It's 12v 16.5 amps 203 watts output.
I prefer ac to DC driver but a 80w driver wasn't very cheap I would rather put any extra cash into my flower lights. My flower light is going to be Vero 29's an meanwell drivers controlled with a arduino controller. That an if it don't work like I want I'll use it charge batteries for my vaporizer.
Edited by funky (11/24/16 01:32 AM)
| |
|
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
