Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
It might add some resistance, therefor heat and power consumption, but it shouldn't add significantly. Maybe a super small amount.
Watts = Volts (120) X amps (however many amps your equipment pulls)
A 15 amp breaker can handle 1800w; 20A is 2400w. If you draw more than that the breaker will trip and you are running too many watts. Don't run all 1800w over that one outlet, spread it out between a few so that it doesn't burn your house down as quickly. Check your house, sometimes a few rooms share breakers and you can be pulling too much without looking like your overloading it.
If your really concerned about it, turn the fan down and it will use less watts itself. You can also get a kill-a-watt meter to check your power draw.
-------------------- Any help given is for educational purposes only. Its your responsibility not to break any applicable laws
Bamboo Bongs I make | Perfect Dry and Cure | Grapegod under LED “Human beings, vegetables, or cosmic dust, we all dance to a mysterious tune intoned in the distance by an invisible player.” ~ Albert Einstein
Threaded
Previous
Index
Next
Shop: 
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
Bamboo Bongs I make
