Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
I started to set my tent up this morning. After a few minutes I had the frame all assembled. Then I tried to set the flooring up which looks like it pulls over the frame. But no matter how hard I try I cant get the last corner to go over the frame. I have made sure the pieces are all together as tightly as possible by knocking them tight with a hammer but I still cant get it over.
Any tips?
Cheers Magickz
-------------------- In the human brain, the hypothalamus controls the four f's:
1. Fighting 2. Fleeing 3. Feeding and ...4. Mating
Hi everyone. So I've got my tent all setup. I've hung the lights off the top bars using some hanging chain and keyrings.
How high should I have my lights. At the moment they are about 4feet above the floor. Should I raise them all the way to the roof? Or should I leave them as is and raise the lights as they grow.
Also, what temps should I be aiming for? I've got it all running now, lights and exhaust. The temp at the floor seems to be sitting 3-4 degrees above room temp (tent is 27-28o celcius, room is 24o celcius) I'm going to get some ducting and duct my exhaust into the ceiling of my house which should hopefully keep the room a little cooler (at the moment exhaust is venting into the same room). With summer just around the corner, I'll probably invest in an aircon unit.
Also, there are many other airvents around the tent, too many imo. Would I benefit with keeping the tent cooler if I were to cover some of these vents up? Or is it better to leave it as it is?
Here are pics of my setup, is it all ok? Anything you guys would change?
Cheers MagickZ
-------------------- In the human brain, the hypothalamus controls the four f's:
1. Fighting 2. Fleeing 3. Feeding and ...4. Mating
Threaded
Previous
Index
Next
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
