|
 alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
 Getting into glass-blowing 
#571000 - 07/09/11 11:34 PM (13 years, 5 months ago) |
|
|
I just bought a torch, and will be renovating my garden shed over the next month too make room for my studio. It's going to be a blast. Here's the torch I bought, and I'll be sure to post my WIPs. I'll be making plenty of chillums, pipes, and hopefully I'll be able to make some bubblers to trade in the lot. So keep an eye out. Let me know if any of you are pre-interested.
Btw, this craft is extremely expensive. This torch retails at $500 (I found it for $330), and I've still got another $700 in start up costs.
|
Manitou
Indépendantiste
Registered: 05/03/11
Posts: 7,126
Loc: Québecédelic
Last seen: 4 days, 11 hours
|
Re: Getting into glass-blowing [Re: alienscience]
#571002 - 07/09/11 11:52 PM (13 years, 5 months ago) |
|
|
Damn I cannot wait to see what kind of pipes you will do, I might try to purchase one from you if possible 
--------------------
Pour un instant, j'ai respiré très fort
Ça m'a permis de visiter mon corps
Des inconnus vivent en roi chez moi
Moi qui avait accepté leurs lois
J'ai perdu mon temps à gagner du temps
J'ai besoin de me trouver une histoire à me conter
Pour instant j'ai oublié mon nom
Harmonium - Pour un instant
--------------------------------------------
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: Manitou]
#571007 - 07/10/11 01:05 AM (13 years, 5 months ago) |
|
|
Right now I've only got glass thick enough to make chillums, and I'll have to do some pendant work first. But I'll host a contest for my first 5 chillums on here. I'm probably going to start clearing up my shed tomorrow. I'll post pictures.
|
volcomstoner
Just one more xanax
Registered: 03/30/09
Posts: 4,956
Loc: Gaybec
Last seen: 7 years, 30 days
|
Re: Getting into glass-blowing [Re: alienscience]
#571060 - 07/10/11 12:35 PM (13 years, 5 months ago) |
|
|
sick dude
Glass blowing would be fucking sweet too learn, too expensive for me to start though
Good Luck man, hope you make some cool shit
--------------------
Vas donc jouer dans le traffic
|
KaptKid
Spaced Pirate
Registered: 04/20/08
Posts: 5,615
Loc: Bright Side of the Sun
Last seen: 1 year, 21 days
|
 Re: Getting into glass-blowing [Re: alienscience]
#571063 - 07/10/11 12:38 PM (13 years, 5 months ago) |
|
|
This sounds sweet.
Will be watching. 
--------------------
Child of the 60's, Tripping ever sence.
|
I_AM_SWIM
Someone Who Isn't McKenna
Registered: 06/08/09
Posts: 1,337
Last seen: 12 years, 5 months
|
Re: Getting into glass-blowing [Re: KaptKid]
#571066 - 07/10/11 12:44 PM (13 years, 5 months ago) |
|
|
u should blow a pipe about this big
|
DungenessDank
Lord of the Flies
Registered: 05/05/08
Posts: 9,372
Loc: PNW
Last seen: 11 years, 6 months
|
Re: Getting into glass-blowing [Re: I_AM_SWIM]
#571070 - 07/10/11 01:48 PM (13 years, 5 months ago) |
|
|
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: DungenessDank]
#571087 - 07/10/11 03:18 PM (13 years, 5 months ago) |
|
|
I'll be sure to watch out for this too:
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: alienscience]
#571111 - 07/10/11 05:06 PM (13 years, 5 months ago) |
|
|
I've just spent the past hour cleaning out my shed and it's extremely hot, covered in wasp nests, and molding.
It really needs some work. The worst part has to be the wasps, there is at least 10 nests in there and some of them have actual wasps in them. Oh well, it will be worth it in the end.
|
KaptKid
Spaced Pirate
Registered: 04/20/08
Posts: 5,615
Loc: Bright Side of the Sun
Last seen: 1 year, 21 days
|
Re: Getting into glass-blowing [Re: alienscience]
#571114 - 07/10/11 05:12 PM (13 years, 5 months ago) |
|
|
Post some pic's so we can the progess.
--------------------
Child of the 60's, Tripping ever sence.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: KaptKid]
#571136 - 07/10/11 06:10 PM (13 years, 5 months ago) |
|
|
I got it about half way cleared out today. There's a bunch of mold and weeds growing inside of it, but it will definately suffice as a workspace. I'd probably consider it more of a workshop than a studio.
Here's some pictures of it:
Pictures are pre-op =) More to come. I'm lucky to have such a nice commidity, starving children in Africa...JK.
On a more serious note, the shed isn't mine. So I'm going to have to share it with a lawnmower, the orange one in the picture.
|
KaptKid
Spaced Pirate
Registered: 04/20/08
Posts: 5,615
Loc: Bright Side of the Sun
Last seen: 1 year, 21 days
|
Re: Getting into glass-blowing [Re: alienscience]
#571148 - 07/10/11 06:59 PM (13 years, 5 months ago) |
|
|
Nice looking place to start out.
Most important thing the rent is right.
--------------------
Child of the 60's, Tripping ever sence.
|
blunt master
up in smoke
Registered: 06/11/08
Posts: 1,089
Loc: NY
Last seen: 10 years, 5 months
|
Re: Getting into glass-blowing [Re: KaptKid]
#571151 - 07/10/11 07:15 PM (13 years, 5 months ago) |
|
|
sounds cool man def keep us updated on how it goes!
|
bryguy27007
Registered: 10/19/08
Posts: 172
Loc: Minnesota
Last seen: 11 years, 11 months
|
Re: Getting into glass-blowing [Re: blunt master]
#571665 - 07/13/11 12:12 AM (13 years, 5 months ago) |
|
|
That is awesome man! I got so ready to get a torch and all the materials but I don't have a space to do it in. My place is tiny and I don't have a shed or anything like that. Plus the ventilation would cost a fortune and it's more dangerous than I first thought. What are you going to use for ventilation?
Maybe I should find a headshop that would offer me another lesson (I did one in Colorado, so much fun).
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: bryguy27007]
#571672 - 07/13/11 01:31 AM (13 years, 5 months ago) |
|
|
I've got an old attic fan I'm going to place into the wall. I may upgrade as time goes by, but I think it will suffice for now. I've read that you need like a 4000cfm fan to properly vent an area. I'm hoping mine will work for starting out. You can always just rent an art studio downtown for a couple hundred a month. They usually have a window, venting wouldn't be too much of a problem.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: alienscience]
#571680 - 07/13/11 04:12 AM (13 years, 5 months ago) |
|
|
I'm about to go back out and get to work. I should have it all cleaned out by the end of today. I'm going to be cutting my old grow box into a work bench =) I'm also selling all of my grow gear to help fund my new hobby. Check out the lot for my 'for sale' thread. I've LED panels, timers, CFLs, etc.
|
DungenessDank
Lord of the Flies
Registered: 05/05/08
Posts: 9,372
Loc: PNW
Last seen: 11 years, 6 months
|
Re: Getting into glass-blowing [Re: alienscience]
#571688 - 07/13/11 06:10 AM (13 years, 5 months ago) |
|
|
|
 Alounacara
Born to be banned....
Registered: 04/20/08
Posts: 6,621
Loc: Spicemaster, Texas
|
 Re: Getting into glass-blowing [Re: alienscience]
#571698 - 07/13/11 06:48 AM (13 years, 5 months ago) |
|
|
Good luck selling your led panels, i still have 2 i cant give away
--------------------
You never see a motorcycle parked outside a psychiatrist office
Texas is humongus compared to France
Our Gair, who art in Texas,
Paw Paw be thy Name..
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: Alounacara]
#571787 - 07/13/11 10:43 AM (13 years, 5 months ago) |
|
|
Thanks, I'm thinking about trying ebay for the LED panels.
As for the shed, it's coming along great. Except, I accidently killed a frog. I cutting down the weeds that were growing into the shed from the outside edge of the floor with some garden shears. A tiny frog jumped onto/into the blades and was cut in half. It happened so fast, and all I saw was a blur. But I had an idea of what occurred. It was sickening, the top half of his body was still moving after he'd been cut. I didn't realize it until five minutes after it happened too. I had to put him out of his misery....
I stopped after about an hour and a half to go buy some extra wood and foam spray to seal the cracks in the shed. I'm about to go out and finish it now =) I should have it mostly done by tonight. Pictures to come.
Nice startrek gif 
|
volcomstoner
Just one more xanax
Registered: 03/30/09
Posts: 4,956
Loc: Gaybec
Last seen: 7 years, 30 days
|
Re: Getting into glass-blowing [Re: alienscience]
#571943 - 07/13/11 08:36 PM (13 years, 5 months ago) |
|
|
Quote:
alienscience said:
I'll be sure to watch out for this too:
ummm, wtf??
what is the meaning of this
--------------------
Vas donc jouer dans le traffic
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: volcomstoner]
#571950 - 07/13/11 08:53 PM (13 years, 5 months ago) |
|
|
I was teh high.
|
volcomstoner
Just one more xanax
Registered: 03/30/09
Posts: 4,956
Loc: Gaybec
Last seen: 7 years, 30 days
|
Re: Getting into glass-blowing [Re: alienscience]
#571956 - 07/13/11 09:19 PM (13 years, 5 months ago) |
|
|
--------------------
Vas donc jouer dans le traffic
|
Alounacara
Born to be banned....
Registered: 04/20/08
Posts: 6,621
Loc: Spicemaster, Texas
|
Re: Getting into glass-blowing [Re: alienscience]
#571963 - 07/13/11 09:48 PM (13 years, 5 months ago) |
|
|
Quote:
alienscience said:
Thanks, I'm thinking about trying ebay for the LED panels.
Why you can get both of mine pretty much for free?
--------------------
You never see a motorcycle parked outside a psychiatrist office
Texas is humongus compared to France
Our Gair, who art in Texas,
Paw Paw be thy Name..
|
Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,050
Loc: No where ville, USA 
|
Re: Getting into glass-blowing [Re: Alounacara]
#571967 - 07/13/11 10:00 PM (13 years, 5 months ago) |
|
|
Quote:
Alounacara said:
Quote:
alienscience said:
Thanks, I'm thinking about trying ebay for the LED panels.
Why you can get both of mine pretty much for free?
What kind of panels do you have?
I'm really getting into these LED's.
--------------------
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: Stoneth]
#571969 - 07/13/11 10:09 PM (13 years, 5 months ago) |
|
|
I'm trying to sell mine. I've got 4 15w panels, chinese made. They will efficiently vegetate two plants to about 3 feet tall with a fraction of the cost, heat, and power. They're in perfect condition, minus a scratch or two.
You probably have one of those huge 400w ones don't you? I may make a housing for the four I have with fans and universal wiring to a timer. I'll probably get a better sale that way.
|
Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,050
Loc: No where ville, USA
|
Re: Getting into glass-blowing [Re: alienscience]
#571991 - 07/13/11 10:58 PM (13 years, 5 months ago) |
|
|
Yeah I seen your post in the lot.
Those 15watters aren't really what I'm looking.
But when a man says give away, how that's a dirreent story.
I currently have a 120 watt four band, and plan on ordering two 360's 7 band in the near future.
--------------------
|
Alounacara
Born to be banned....
Registered: 04/20/08
Posts: 6,621
Loc: Spicemaster, Texas
|
Re: Getting into glass-blowing [Re: Stoneth]
#572000 - 07/13/11 11:18 PM (13 years, 5 months ago) |
|
|
Quote:
Stoneth said:
Quote:
Alounacara said:
Quote:
alienscience said:
Thanks, I'm thinking about trying ebay for the LED panels.
Why you can get both of mine pretty much for free?
What kind of panels do you have?
I'm really getting into these LED's.
I gotta red that dont do shit and a combo that throws pretty good light
$25 and they are yours bubba
seriously
--------------------
You never see a motorcycle parked outside a psychiatrist office
Texas is humongus compared to France
Our Gair, who art in Texas,
Paw Paw be thy Name..
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: Alounacara]
#572007 - 07/13/11 11:24 PM (13 years, 5 months ago) |
|
|
Hmm, I'm good. I may just end up using mine to light my workshop.
|
Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,050
Loc: No where ville, USA
|
Re: Getting into glass-blowing [Re: Alounacara]
#572008 - 07/13/11 11:25 PM (13 years, 5 months ago) |
|
|
Give me a few days to think on it.
--------------------
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: Stoneth]
#572011 - 07/13/11 11:34 PM (13 years, 5 months ago) |
|
|
Mine are all for sale, I'll throw in a light timer with them for $90. Plus, you get one of my first handblown chillums, once I get my torch up and running.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: alienscience]
#573412 - 07/20/11 04:16 PM (13 years, 4 months ago) |
|
|
Got the torch in the mail today. Made an un-boxing video. Be sure to watch until the end:
|
KaptKid
Spaced Pirate
Registered: 04/20/08
Posts: 5,615
Loc: Bright Side of the Sun
Last seen: 1 year, 21 days
|
Re: Getting into glass-blowing [Re: alienscience]
#573417 - 07/20/11 04:40 PM (13 years, 4 months ago) |
|
|
Very dark.
Hard to see.
Show a pic of the torch.
--------------------
Child of the 60's, Tripping ever sence.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: KaptKid]
#573423 - 07/20/11 05:19 PM (13 years, 4 months ago) |
|
|
If you watch until the end, you can see a picture. Remember, I said watch the whole thing. Pic shot a 2:35 after spoiler =)
|
KaptKid
Spaced Pirate
Registered: 04/20/08
Posts: 5,615
Loc: Bright Side of the Sun
Last seen: 1 year, 21 days
|
Re: Getting into glass-blowing [Re: alienscience]
#573468 - 07/20/11 08:03 PM (13 years, 4 months ago) |
|
|
Guess I was to stoned the 1st time.
--------------------
Child of the 60's, Tripping ever sence.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: KaptKid]
#573476 - 07/20/11 08:39 PM (13 years, 4 months ago) |
|
|
Lol, lucky you.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: alienscience]
#574132 - 07/23/11 10:56 AM (13 years, 4 months ago) |
|
|
Another video. This time of the shed.
Dubbed over w/ computer, so audio is a little off.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: alienscience]
#576738 - 08/05/11 03:17 PM (13 years, 4 months ago) |
|
|
Edited by alienscience (08/05/11 03:20 PM)
|
bryguy27007
Registered: 10/19/08
Posts: 172
Loc: Minnesota
Last seen: 11 years, 11 months
|
Re: Getting into glass-blowing [Re: alienscience]
#577361 - 08/09/11 11:49 AM (13 years, 4 months ago) |
|
|
What a cute dog. Looks like you got some nice space there man. I can't wait to hear more from how it goes. If I hear enough good things from you it might be enough for me to get some gear for when I move into a place that will have space.
You should post some of it up anyway if you get a chance.
Just once a week or something post up a piece and we'll be able to see your progress over time. I think it'd be pretty cool.
|
alienscience
Farve in training
Registered: 01/04/11
Posts: 478
Last seen: 4 years, 4 months
|
Re: Getting into glass-blowing [Re: bryguy27007]
#577426 - 08/09/11 04:26 PM (13 years, 4 months ago) |
|
|
Will do Bryguy. I'm still in the process of setting everything up, but I should have it up and running full time by the end of the month =) Ty for the tip.
|
bryguy27007
Registered: 10/19/08
Posts: 172
Loc: Minnesota
Last seen: 11 years, 11 months
|
Re: Getting into glass-blowing [Re: alienscience]
#577475 - 08/09/11 11:36 PM (13 years, 4 months ago) |
|
|
Oh you're a member of MAPS too. I just started donating to them 2 or 3 months ago. I am a proud member. You like glassblowing too, damn. 5 for you man.
Keep me updated man.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
