Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
i have spent a few hours reading ideas but that's not much when almost everything you read contradicts itself i would like opinions on whats better actual silk screen or steel? i have read arguments for both. Also what would you choose as your mesh size? i read 100 is great, under is not suitable and over is disappointing. Obviously the finer the mesh the better quality the kief. i'm gonna buy a roll of mesh and experiment. the ideal box i am picturing in my head would be made out of a backing tray either glass or ceramic.with that im not sure i wold even need/want a tray inside that would come out. i would also like for the machine to vibrate to do the work for me. after some searching i found to attach an old rock tumbler to it. but I would also like to put the whole box in he freezer, because the thc will be more brittle and willing come off easier. Do you guys think the rock tumbler can handle the freezer for 8-24 hours at a time? if not do you have any other suggestions for things i can use to vibrate that will withstand prolonged freezing temps. or maybe just something cheaper that can be battery powered. also do you guys think that is a fire hazard? i now this is at of gibberish I know all this is not necessary feel free to ask questions, comment or hate but i wold love ideas especially if its something haven't thought of at all.
-------------------- DO NOT USE mushmagic.com- THEY LIE AND SELL DRUGS TO CHILDREN --------------------------------------------------
Back the tape up. I need it again!
Let it roll! Just as high as the fucker can go!
And when it comes to that fantastic note
where the rabbit bites its own head off,
I want you to THROW THAT FUCKING
RADIO INTO THE TUB WITH ME!
Not me. It would blast you through
the wall stone dead in ten seconds and they'd make me explain.
Quote: 206 said: 43T will work great, that is roughly 150 microns. 48T (135 microns) or 61T (92 microns) will give you finer hash though obviously.
Weigh the trim before you start making hash, the resin should amount to 10-15% of the trim weight.
This is some 174 micron I just pressed for reference:
Last run I threw all my dry trim in foodsaver bags and vacuum sealed them before freezing. That condenses the shit out of the trim and makes it much easier to work with as well as makes the trichs brittle. Then I run it through a completely sealed espresso grinder for a couple seconds and dump onto the screen. Just old school elbow grease from there though so I can't help you with the rock tumbler. Unless you have a couple hundred grams of trim or more its really no sweat doing manually though.
Good luck and throw some pictures up when you finish that thing.
-------------------- DO NOT USE mushmagic.com- THEY LIE AND SELL DRUGS TO CHILDREN --------------------------------------------------
Back the tape up. I need it again!
Let it roll! Just as high as the fucker can go!
And when it comes to that fantastic note
where the rabbit bites its own head off,
I want you to THROW THAT FUCKING
RADIO INTO THE TUB WITH ME!
Not me. It would blast you through
the wall stone dead in ten seconds and they'd make me explain.
-------------------- DO NOT USE mushmagic.com- THEY LIE AND SELL DRUGS TO CHILDREN --------------------------------------------------
Back the tape up. I need it again!
Let it roll! Just as high as the fucker can go!
And when it comes to that fantastic note
where the rabbit bites its own head off,
I want you to THROW THAT FUCKING
RADIO INTO THE TUB WITH ME!
Not me. It would blast you through
the wall stone dead in ten seconds and they'd make me explain.
Threaded
Previous
Index
Next
Edit 
Reply 
