|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
 where to start during the construction process 
#385832 - 03/18/10 11:19 AM (14 years, 9 months ago) |
|
|
Hey guys, I will be moving in a couple months and want to build rooms for some plants. I have all the space I need, enough money to buy/build the supplies, ability to correctly install wiring, build walls ect. My only real "problem" is that I am overwhelmed where to start. Here is my plan so far.....this thread is just for the construction space aspects, will follow with technical questions later
- 30" closet for seedlings (4 shelves, each with own light)
- separate vegatative room
- flowering room
- preparation/storage area
*Does anybody use the grow rooms for drying/curing or another part of the house? (and if so why?)
*I would like to have plants ready to flower as soon previous ones are ready for harvest, should I build the veg room the same size as flowering?
*I only want to run 3000w for flowering so I should keep plant area approx. 4'x12'...correct? obviously larger than that but the green only covers 4x12. Want to do sog's eventually once I get clones
* I will be starting with only a few plants so I can make the mistakes that are inevitable but want to have the potential to increase, I have lots of bagseed to learn with.
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: creep 1nc]
#385835 - 03/18/10 11:25 AM (14 years, 9 months ago) |
|
|
I forgot to add that I want to stay away from mylar wall coverings and plan on using soil
|
 Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal 
|
Re: where to start during the construction process [Re: creep 1nc]
#385841 - 03/18/10 11:47 AM (14 years, 9 months ago) |
|
|
Sounds like you're on a good track to me. I'll try to address all those questions, let me know if I miss anything.
I always have my veg rooms a little smaller than the flowering room. the plants double or triple in size when they start flowering so if you have the rooms the same size and fill the veg room before moving them to 12/12 you're gonna have a serious problem on your hands. plan on vegging in a 3x3 area and flowering in a 4x4, that will keep your flowering growth dense enough to not waste light, but not so dense that you're wasting nutrients
a 4x4 area is perfect for a 1KW, so a 4x12 space for 3KW sounds great
As for the mylar, it sucks. Flat white paint or black/white poly works just as well and is WAAYYY easier to work with. Don't worry about that at all.
for your 30" seedling area, that's not height is it? if so I would definitely advise against 4 shelves, that's not nearly enough vertical space when you start factoring in lights and pots etc.
--------------------
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: where to start during the construction process [Re: Harry_Ba11sach]
#385842 - 03/18/10 11:48 AM (14 years, 9 months ago) |
|
|
I also forgot to add, have you thought about ventilation yet? that's by far the most important step for a successful grow but for some reason it's usually the last step that gets considered during construction
--------------------
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: Harry_Ba11sach]
#385845 - 03/18/10 11:59 AM (14 years, 9 months ago) |
|
|
Quote:
Harry_Ba11sach said:
for your 30" seedling area, that's not height is it? if so I would definitely advise against 4 shelves, that's not nearly enough vertical space when you start factoring in lights and pots etc.
no it's a 30" wide, 6' tall. How much vertical space per shelf do I need before I put them in the veggie room?
Quote:
Harry_Ba11sach said:
I also forgot to add, have you thought about ventilation yet? that's by far the most important step for a successful grow but for some reason it's usually the last step that gets considered during construction
I have ventilation in my mind but needed to figure out the size of rooms first, the ceilings are 8' tall as we speak. I will be building my own scrubbers for the smell. The rooms will be made airtight and light proof.
Your input is very much appreciated, thanks
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: creep 1nc]
#385846 - 03/18/10 12:01 PM (14 years, 9 months ago) |
|
|
should I plan ahead for a drying/curing area, part of me says it will be necessary to control odor
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: where to start during the construction process [Re: creep 1nc]
#385863 - 03/18/10 12:25 PM (14 years, 9 months ago) |
|
|
Quote:
creep 1nc said:
should I plan ahead for a drying/curing area, part of me says it will be necessary to control odor
That depends on if you're doing a sealed flowering room or not. For a sealed room you'll probably want a drying area just so you can have fresh air exchange to dry/cure the buds, but if you're going to be filtering and expelling the air inside the flowering area then I would personally just dry the buds in there and take advantage of the carbon filter you already have.
I just noticed you said the rooms will be airtight, which is good but keep in mind that means you'll need a split AC system and a dehumidifier, as well as a closed circuit cooling system for your lights and CO2 supplementation. Cost considerably more and is a bit more complex but I think you'll be very pleased with the results.
--------------------
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: Harry_Ba11sach]
#385916 - 03/18/10 02:28 PM (14 years, 9 months ago) |
|
|
split ac? as in air control/alternate current/air conditioning?
I have access to dehumidifiers for free. 
|
mhbound
Ballin out at all cost
Registered: 09/22/08
Posts: 8,144
Loc: High 
|
Re: where to start during the construction process [Re: creep 1nc]
#385927 - 03/18/10 02:57 PM (14 years, 9 months ago) |
|
|
hm...you should sell me one of those dehumidifiers
--------------------
Suck my balls America
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: where to start during the construction process [Re: mhbound]
#385938 - 03/18/10 03:48 PM (14 years, 9 months ago) |
|
|
Split AC as in it cools the intake airand passes the heat to external air through a radiative membrane so you can cool the air in your room without any smell escaping. Keeps the air in your room cool without exhausting anything outside.
--------------------
|
mhbound
Ballin out at all cost
Registered: 09/22/08
Posts: 8,144
Loc: High
|
Re: where to start during the construction process [Re: Harry_Ba11sach]
#385942 - 03/18/10 03:58 PM (14 years, 9 months ago) |
|
|
so, like using a heatsink type setup? im stoned for some reason this is hard to comprehend right now
--------------------
Suck my balls America
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: mhbound]
#385946 - 03/18/10 04:02 PM (14 years, 9 months ago) |
|
|
Quote:
mhbound said:
hm...you should sell me one of those dehumidifiers
go to yellowpages and look up appliance repair, usually just need to clean the evaporator
|
mhbound
Ballin out at all cost
Registered: 09/22/08
Posts: 8,144
Loc: High
|
Re: where to start during the construction process [Re: creep 1nc]
#385948 - 03/18/10 04:03 PM (14 years, 9 months ago) |
|
|
sweet, thanks for the advice...
now let me help you...and give you 5 leaves first.
--------------------
Suck my balls America
|
mhbound
Ballin out at all cost
Registered: 09/22/08
Posts: 8,144
Loc: High
|
Re: where to start during the construction process [Re: mhbound]
#385949 - 03/18/10 04:04 PM (14 years, 9 months ago) |
|
|
check back here within the hour ill have you some stuff written out. im slow.
--------------------
Suck my balls America
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: mhbound]
#385950 - 03/18/10 04:05 PM (14 years, 9 months ago) |
|
|
Quote:
mhbound said:
so, like using a heatsink type setup? im stoned for some reason this is hard to comprehend right now
sounds like a heat exchanger/heatsink set-up too me............off to do some reading, I think I am getting the basics understood now, can't wait to move and get busy
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: creep 1nc]
#385951 - 03/18/10 04:06 PM (14 years, 9 months ago) |
|
|
awesome, thanks guys!
This is exactly what I needed.....just some help to point me in the right direction to know what information to look up
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: where to start during the construction process [Re: creep 1nc]
#385952 - 03/18/10 04:06 PM (14 years, 9 months ago) |
|
|
Yep you guys got it for the most part. It's pretty simple really.
Here's a company that manufactures AC units specifically for cooling grow ops. they have them designed so they can run while still keeping sealed rooms sealed and vented rooms vented but still smell controlled.
http://excelair.ca/
--------------------
|
mhbound
Ballin out at all cost
Registered: 09/22/08
Posts: 8,144
Loc: High
|
Re: where to start during the construction process [Re: Harry_Ba11sach]
#385955 - 03/18/10 04:09 PM (14 years, 9 months ago) |
|
|
I read about this somewhere and I've been trying to delay flowering because I can't figure how to seal the box to deal with smell
I think you just told me how
Thanks Blalscak
--------------------
Suck my balls America
|
creep 1nc
Stranger
Registered: 03/18/10
Posts: 70
Last seen: 13 years, 11 months
|
Re: where to start during the construction process [Re: Harry_Ba11sach]
#385958 - 03/18/10 04:10 PM (14 years, 9 months ago) |
|
|
I have the ability to vent the air out of the grow area as long as it's scrubbed (smell) first. What route would you recommend?
|
mhbound
Ballin out at all cost
Registered: 09/22/08
Posts: 8,144
Loc: High
|
Re: where to start during the construction process [Re: creep 1nc]
#385959 - 03/18/10 04:11 PM (14 years, 9 months ago) |
|
|
inline fans
or
squirrel cage fans
--------------------
Suck my balls America
Edited by mhbound (03/18/10 04:12 PM)
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
