|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 legallyhomeless
Registered: 05/16/08
Posts: 217
|
 DIY Carbon Scrubber  3
#33157 - 05/18/08 03:30 PM (16 years, 7 months ago) |
|
|
Supplies:
1x 6" to 8" Reducer
1x 6" Duct Cap
1x 8" Duct Cap
1x 5' Roll of 1/4" Hardware Cloth
2x 8" Hose Clamps
1x 6" Piece of 6" (duct) Pipe
1x Pair Panty Hose (color optional  )
Carbon (from pet store)
Poly "quilt filler" (from craft store)
Sheet Metal Screws
Construction:
First cut your 6" piece of duct pipe. Cut your piece of hardware cloth to fit around the 6" pipe leaving a 2" overlap. PULL IT TIGHT.
Next screw the hardware cloth to the 6" pipe leaving 2" at the end of the pipe clean. This way it will fit into the 6" to 8" reducer.
Do this at the other end with the 6" cap. I used zipties to tie the hardware cloth down in a few spots.
Now pull your piece of panty hose over the whole unit and push it firmly into the 6" to 8" reducer.
The INNER CORE is complete.
Next, push poly fill into the space between the 6" to 8" reducer and the filter core.
Then cut your piece of hardware cloth to go around the 6" to 8" reducer and screw it on. I used zipties again to secure the hardware cloth.
Add prefilter if desired. (makes carbon last longer)
I used a hose clamp to secure it on both ends of the filter. I also used white yarn to stitch the seam.
Add your carbon.
Put a layer of polyfill under end cap.
Hose clamp the cap to the end for easy refills.
Now you just have to add your blower. 
Edited by legallyhomeless (08/14/09 02:33 PM)
|
 Sirius
Saturn Ascends
Registered: 04/20/08
Posts: 1,540
Loc: The Milky Way
Last seen: 8 years, 8 months
|
 Re: DIY Carbon Scrubber (moved) [Re: legallyhomeless]
#35643 - 05/21/08 05:32 AM (16 years, 7 months ago) |
|
|
 This thread was moved from Indoor Hydroponic Cultivation.
Reason:
Moving to the main cultivation forum since its a topic for indoor growing in general.
|
Uns4ne
King of Twisted Irony
Registered: 04/21/08
Posts: 343
|
Re: DIY Carbon Scrubber (moved) [Re: Sirius]
#35741 - 05/21/08 12:30 PM (16 years, 6 months ago) |
|
|
Awesome build. I'm defiantly going to try your design.
--------------------
Fighting Terrorism One Seed At A Time
Big Bang, Arjan's Haze #3 Growlog
My First Grow(Complete)Never let school get in the way of your education.-Mark Twain
|
legallyhomeless
Registered: 05/16/08
Posts: 217
|
Re: DIY Carbon Scrubber (moved) [Re: Uns4ne]
#36078 - 05/21/08 08:01 PM (16 years, 6 months ago) |
|
|
Yeah, Ive seen a lot of design and I put the ones I liked the best together. After I already bought the metal pieces, I found black ones that were the same size, and I wish I would have used them.
Just because its DIY doesnt mean it shouldnt look and work like the real deal.
|
Evan
Medical Marvel
Registered: 04/21/08
Posts: 169
Last seen: 16 years, 5 months
|
Re: DIY Carbon Scrubber (moved) [Re: legallyhomeless]
#39241 - 05/25/08 04:24 PM (16 years, 6 months ago) |
|
|
How much carbon should you use? Do you still get that great carbon filter smell from these homemade ones?
|
legallyhomeless
Registered: 05/16/08
Posts: 217
|
Re: DIY Carbon Scrubber (moved) [Re: Evan]
#40668 - 05/27/08 08:44 AM (16 years, 6 months ago) |
|
|
You just pour it in until its full. PetSmart has big buckets of the stuff. I dont know about any smells?
|
81renaissance
Coachella '13 KKOTY
Registered: 04/20/08
Posts: 4,182
Loc: State of Mind 
Last seen: 10 months, 1 day
|
Re: DIY Carbon Scrubber (moved) [Re: legallyhomeless]
#40706 - 05/27/08 09:55 AM (16 years, 6 months ago) |
|
|
Hey homeless...looks like you're gonna be a rockstar over here too! Nice build.
--------------------
"So it goes."
-Kurt Vonnegut
BlueBerry_Swisher said:I want French fries. No, I want a penis French. Thank you. I'm so excited. I can not contain myself. Now I eat chocolate. It is so good. I'm trying to rub it all over myself. And then lick. Now I need a hot shower. The end.
|
pong
Registered: 05/01/08
Posts: 548
Last seen: 14 years, 10 months
|
Re: DIY Carbon Scrubber (moved) [Re: 81renaissance]
#41395 - 05/27/08 06:56 PM (16 years, 6 months ago) |
|
|
what was the total cost of what you made here?
|
legallyhomeless
Registered: 05/16/08
Posts: 217
|
Re: DIY Carbon Scrubber (moved) [Re: pong]
#42154 - 05/28/08 01:04 PM (16 years, 6 months ago) |
|
|
Actually I dont remember the total cost but I would have to say around $40 w/o the carbon.
|
Evan
Medical Marvel
Registered: 04/21/08
Posts: 169
Last seen: 16 years, 5 months
|
Re: DIY Carbon Scrubber (moved) [Re: pong]
#42413 - 05/28/08 09:01 PM (16 years, 6 months ago) |
|
|
there is cheap carbon on ebay if you can't find it locally, which I couldn't. you can get a 5 gallon bucket of granulated activated carbon for 30 bucks. so about 70 bucks total, and I'm sure 5 gallons would include a refill or two if your filter is only 2-3 ft. long.
Thanks Homeless, this is saving me alot of $$
|
Sirius
Saturn Ascends
Registered: 04/20/08
Posts: 1,540
Loc: The Milky Way
Last seen: 8 years, 8 months
|
Re: DIY Carbon Scrubber (moved) [Re: Evan]
#42584 - 05/29/08 03:25 AM (16 years, 6 months ago) |
|
|
*
--------------------
|
legallyhomeless
Registered: 05/16/08
Posts: 217
|
Re: DIY Carbon Scrubber (moved) [Re: Sirius]
#42750 - 05/29/08 12:26 PM (16 years, 6 months ago) |
|
|
sure thing. I love DIY because of the cheap costs to build but at the same time giving good results
|
INC
Registered: 05/11/08
Posts: 36
Last seen: 10 years, 8 months
|
Re: DIY Carbon Scrubber (moved) [Re: legallyhomeless]
#49982 - 06/03/08 05:53 PM (16 years, 6 months ago) |
|
|
for what mine cost to make I could of just bought one these days
I did the diy model and for the time and money it took I would wouldn't do it again
but its a cool tek
i got one floating around the www
some were that i made up
it might come in handy if you a died hard diyer
or if your p-noid about grow shops
Edited by INC (06/03/08 05:56 PM)
|
Evan
Medical Marvel
Registered: 04/21/08
Posts: 169
Last seen: 16 years, 5 months
|
Re: DIY Carbon Scrubber (moved) [Re: INC]
#50254 - 06/03/08 09:27 PM (16 years, 6 months ago) |
|
|
Its cheap as hell to make this? costs me about 70 bucks most caron filters are 120 - 500 depending on size.
I like this design but the granulated activated carbon I had went through the holes in the 1/4" hardware cloth in the outside layer that didn't have the pantyhose. The pantyhose kept ripping as well. I think this tek would be better if it used stainless steel meshing instead of hardware cloth that way you wouldn't need pantyhose at all. Come to think of it window screening can be obtained very cheaply from a hardware store and would be very flexible to use.
Either way it works well.
Edited by Evan (06/04/08 10:03 AM)
|
legallyhomeless
Registered: 05/16/08
Posts: 217
|
Re: DIY Carbon Scrubber (moved) [Re: Evan]
#50577 - 06/04/08 09:14 AM (16 years, 6 months ago) |
|
|
Yes, the panty hose take sometime to pull over the hardware cloth without them ripping. Its best to just start at the end and pull it about 2" at a time. This same size filter name brand would cost around 400
|
SmokerX
Registered: 04/04/09
Posts: 12
Last seen: 10 years, 10 months
|
|
It seems you could wrap a piece of poster board over the hardware cloth until you got the pantyhose on to prevent tearing, then pull the poster board out. But i`ve never built one.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
