Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
This is mostly for making seed and maybe I'll throw the 1000 watt MH in from time to time. I've found a Ak47 x Diesel autoflower by lowlife seeds that I really like. The reason I need seeds.
Looking in thru the door. The room 5 ft. wide,7 ft. long on the left and 5 ft. long on the right.The height is 8-6. The back wall(behind the light) is at an angel.
From the T5 light up.
Hoping that a/c and a Stanly fan will keep it cool in there. There is 6 inchs of insulation in the ceiling and 4 inchs in the walls. Its 9pm here. The outside temp is 82f. In the room with no fan or a/c is 94f. The light has been on for an hour.
This is the heat to be delt with.
This is the 1st time with a T5. It has 8 tubes($300 cost)4at 6500, 4 at 3500 and more heat. Maybe should of gone with a 400 watt hps with air cooled hood.To late now.
Any ideas on any of it?
Will do a test run in a day or so with lights, a/c and fan.
-------------------- Child of the 60's, Tripping ever sence.
your best bet would be to put a air vent near the ceiling, pipe it outside of that room and have a fan blowing air into the room. Kind of like how air ventilators work in bathrooms to help cut down on heat and moisture....
IDK if i like the idea of having an AC in the actual grow room...
hope it works out really well for you... good luck
A/C is not an option. 7am and 82f to start the day. It will be just under a 100f for the high. Not even going to start grow till Sept.Cooler nights. Wanted to go hydro my next time round but have to build a water chiller first. Will need this during my winter and a heater sometimes.
Heat is a big issue here.
-------------------- Child of the 60's, Tripping ever sence.
Threaded
Previous
Index
Next
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
