Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
Basically here are two designs I've come up with for a hydroponic system. This system will have a drip feed and will most likely have 3 to 6 ultrasonic foggers. The foggers would be feed by their own drip feed that feed continuously. The plant's drippers would go on 2 to 3 times a day. I may go with only 3 foggers because six just seems like a lot. The system will be 6 feet long (with 6 net pots a foot or so away from each other). My main concern is would either of these systems provide enough space for large root systems (6 plants that are 3 feet tall)?
Any suggestions or improvements would be greatly appreciated. Also which would be better design 1 (the first two pictures) or design Two (the third pic). Also is design 2 even needed? Will a 3 to 5 inch deep PVC pipe or fence post provide enough space for the roots of (6 plants) that are 2 to 3 feet tall each.
These first two pictures are of my first design.
The second design (it's just like the first except it has 3 inch cylinders that raise the net pots 3 inches above the main PVC pipe. This would have extra root space).
Both my foggers and my system are based in idea off of this system on this youtube video.
Registered: 02/01/09 Posts: 36 Last seen: 15 years, 2 months
Re: Will this be a good hydroponic system to make (Top drip and Ultrasonic foggers). [Re: ronjohn7779] #218538 - 04/22/09 08:25 AM (15 years, 11 months ago)
Registered: 02/01/09 Posts: 36 Last seen: 15 years, 2 months
Re: Will this be a good hydroponic system to make (Top drip and Ultrasonic foggers). [Re: Dr. Siekadellyk] #219146 - 04/23/09 09:29 PM (15 years, 11 months ago)
Registered: 02/01/09 Posts: 36 Last seen: 15 years, 2 months
Re: Will this be a good hydroponic system to make (Top drip and Ultrasonic foggers). [Re: Dr. Penguin] #219637 - 04/25/09 12:04 PM (15 years, 11 months ago)
Cool thanks for the input. In any case. I've changed mind on that system. I'll most likely actually use 8 to 10 inch PVC pipe instead of 3-5 inch. I was told by someone who makes (and sells a similar) system that 3-5 inches wouldn't work out. Also I've just dropped the idea of foggers. I've been reading that they aren't as good as some make them out to be, however they are great for root development in clones. So I'll just do something along those lines for my cloning area.
Threaded
Previous
Index
Next
Shop: 
Some of these posts are very old and might contain outdated information. You may wish to 
Edit 
Reply 
