Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 reckless
Stoner
Registered: 02/13/09
Posts: 21
Loc: 
Last seen: 14 years, 1 month
|
 Building a box 
#195628 - 02/13/09 03:37 PM (15 years, 9 months ago) |
|
|
I'm looking for some help designing my box.. I started out by looking at some premade boxes similar to these- http://www.4eversun.com/products.htm
But soon realized that they were outside my budget, and it would be easy enough to construct my own..
I have a budget of about 1000 dollars, and with the space I have, I'm thinking a 2x4 footprint would work well.. I was thinking I'd do a SOG for a shorter, more compact box..
Also, I am considering building it out of plywood, but am also looking at premade cabinets that I could modify.. I don't own any tools, so any tools that I would have to buy come out of my budget..
I'm completely new at this, so I'd appreciate some feedback from you guys!
edit:more specifically what I am looking for is plywood vs. Modified cabinet. Suggestions on dimensions.. Also suggestions for ventilation and filtration(of the smell)..
Edited by reckless (02/13/09 03:48 PM)
|
 Dr. Penguin
Registered: 05/19/08
Posts: 1,036
|
Re: Building a box [Re: reckless]
#196187 - 02/15/09 09:23 AM (15 years, 9 months ago) |
|
|
The big deciding factor for me between pre-fab and home made was the amount of time and effort involved. I consider myself relatively handy but designing and constructing a cab was just not worth it when I could buy one for 70$. I went with a home depot melamine cabinet. (Which you have to buy a back board for because the one they include is cardboard.) You can check out my construction thread Here.
Mine is a bit bigger than what you are looking for but maybe you can find something that can help. Make sure to take a lot of pictures when you start building, I'd love to have a look. 
|
coda
Registered: 04/20/08
Posts: 4,736
|
|
That's a nice cab there doc, I'm gonna have to hit you up with some questions when i get back in the game. Recent space limitations and increased paranoia on the girlfriends part have forced me to retire my hydro hut and look for something a bit stealthier. I plan on running a 600 watt bulb in mine though, think the space would be adequate enough to handle the increased wattage? Are you just circulating your vented air back into the room again, or are you piping it somewhere else?
--------------------
MFDoom666: sobriety kills my buzz every time.
|
MistaUNGA
green crack GREEN CRACK!!
Registered: 04/22/08
Posts: 2,382
Loc: Kalifornien, im Süden...
Last seen: 14 years, 3 months
|
|
slick cab man 
--------------------
I'm an electric smoker 
ExplosiveMango said:
If everyone could do mushroom, yes, it would be a wonderful world. This will never be, only some can do mushrooms. It is the responsibility of those of us who see the world most clearly to pass the clarity on to those who cannot bare to wear our lenses.
Madtowntripper said:Or just give her a cloroform soaked rag and tell her it's ether!
|
Dr. Penguin
Registered: 05/19/08
Posts: 1,036
|
Re: Building a box [Re: MistaUNGA]
#196252 - 02/15/09 02:11 PM (15 years, 9 months ago) |
|
|
Heat is vented into the room where a window is usually cracked. With that size cab, I would recommend against a 600w, I have a bit of trouble with my 400w in a cool-tube (7o above ambient can get rough when it gets warm here.)
Good luck with your cab man, let me know how I can help.
|
reckless
Stoner
Registered: 02/13/09
Posts: 21
Loc:
Last seen: 14 years, 1 month
|
|
That's pretty nice doc, thanks.. That's pretty much what I was looking for.. And for around $500, I'll have some scratch left over..
|
coda
Registered: 04/20/08
Posts: 4,736
|
Re: Building a box [Re: reckless]
#196656 - 02/16/09 04:13 PM (15 years, 9 months ago) |
|
|
crap, i need to come up with something similar that can handle a 600 watt light. Maybe a stronger fan might help. I just don't have the room for my tent anymore.
--------------------
MFDoom666: sobriety kills my buzz every time.
| |
|
|
 |
|
Building a box
(  1 2 all ) |
 Jrsxt |
13,006 |
38 |
05/13/08 02:33 AM
by Sirius | |
|
The Doc builds a cab
( 1 2 all ) |
 Dr. Penguin |
20,325 |
29 |
02/17/11 05:26 PM
by Carcass | |
|
Lets build a grow room!
( 1 2 3 4 all ) |
 lopan |
60,626 |
69 |
12/28/12 06:22 AM
by Green Gun | |
|
Flowering tents, inline centrifugal fans, veg boxes...mmmmm |
 icanfeeltherain |
3,107 |
6 |
03/31/09 04:31 PM
by pong | |
|
Do you think this could be turned into a decent grow box? |
CaptTrip |
3,170 |
5 |
08/07/08 08:00 PM
by Sirius | |
|
The Doc builds a clone/mother tent
( 1 2 all ) |
Dr. Penguin |
32,881 |
28 |
11/23/10 07:30 AM
by Dr. Penguin | |
 |
building a stealth box out of a server case: |
 yellownotepad |
5,277 |
14 |
07/31/08 11:46 AM
by yellownotepad | |
|
Box design & Ventilation |
 Eleutherios |
2,289 |
6 |
07/21/08 12:15 PM
by coda |
|
|
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
