Welcome to the Growery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!
IMO rockwool cubes are the cheapest and easiest method of cloning.
But if you want to build a cloner you'll need a light proof cantrainer with lid large enough to hold the number of clones you want to root and about a gallon Or more of water. Also some air stones large as possible the better you spread the bubbles the better they work.Ar pump and tubing as well. Once again more bubbles the better. And then some Clone Collar Cloner Foam Neoprene Inserts .
Make holes in lid to fit the collars you choose. Make a tight hole in container above the max water line for the air hose/tubing. Place air stores on botton try to spread them so that there is bubbles all across the top of the water.
I recommend the water line be no less than 1/4 inch below the bottom of the stems.
So I recommend you reading some cloning teks. But I cut dip in cloning gel stick in cube put on plate under light.I vater once per day.I don't use a dome or mist.
Depending on your enviroment you hay need a dome or may need to mist.