|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 Tank333
Psychotic Hippie
 
Registered: 08/19/10
Posts: 1,241
Loc: Washington
Last seen: 4 years, 10 months
|
|
I don't think this is an issue. I was talking to the guy at the hydro shop, and his EZCloner had 12 of the little red sprayers, and a 550+ gph pump...
As long as there aren't any leaks, I think you'll be fine.
How tightly do your sprayers fit into your pvc pipe? Mine didn't fit so tightly and had water running out underneath. Before I sealed the lid with silicone, I put a ring of silicone under each of the sprayers to see if I could increase the pressure a little.
I just finished making a 16 site aero/vegger with aznshroomer's tek. I'm going to use it to flower a small SOG as soon as my fan and filter get here in a couple days...
--------------------
My best run so far
|
Rusty ShackleFord
Stranger Danger
Registered: 04/04/11
Posts: 19
Last seen: 13 years, 6 months
|
 Re: DIY- Build your own Aeroponic cloner!  [Re: Tank333]
#545753 - 04/12/11 06:09 PM (13 years, 7 months ago) |
|
|
yep the Guy at the store hooked me up with the pump and spray heads so I know I got a good match for my bucket. I have no leaks. My heads fit tight. I just wonder should they be allowed to dry some. It looks like the tips are starting to turn brown. Should I add some hydrogen peroxide. Temps between 70&80.
|
Damion5050
Perscribing Mushrooms Is Fun
Registered: 03/28/10
Posts: 67
Last seen: 7 years, 2 months
|
|
--------------------
AMU - Q&A
MY GROW LOG
MY ELEMENTARY COIR TEK
EVERYTHING YOU NEED TO CULTIVATE MUSHROOMS
Live well, laugh often, love much. -- Stand up for what you believe in, even if it means standing alone. -- Dont follow the beaten path. Go your own way and leave a trail.
|
Rusty ShackleFord
Stranger Danger
Registered: 04/04/11
Posts: 19
Last seen: 13 years, 6 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: Damion5050]
#546158 - 04/13/11 06:46 PM (13 years, 7 months ago) |
|
|
great link and bad ass build, but to much info to sort through to get my answer thanks.
--------------------
Dale Gribble: Is that a real computer? Man: Yes, it is. Dale Gribble: [nervously] Then my name is Rusty Shackleford !!!!
|
IrieLife
Happy Grower
Registered: 07/16/11
Posts: 2
Last seen: 13 years, 4 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: azshroomer]
#572617 - 07/16/11 11:58 PM (13 years, 4 months ago) |
|
|
Hey
We are building your Cloner unit now......Where Does the weather stripping go?
|
IrieLife
Happy Grower
Registered: 07/16/11
Posts: 2
Last seen: 13 years, 4 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: azshroomer]
#572626 - 07/17/11 12:32 AM (13 years, 4 months ago) |
|
|
Where do you put the weather stripping?
|
taz
Stranger
Registered: 07/25/11
Posts: 1
Last seen: 13 years, 3 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: IrieLife]
#574513 - 07/25/11 09:11 AM (13 years, 4 months ago) |
|
|
hi just building your setup looks good , do you leave pump running 24/7? and do you need any air intake into the system?
|
 Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,048
Loc: No where ville, USA 
|
Re: DIY- Build your own Aeroponic cloner! [Re: taz]
#574519 - 07/25/11 11:14 AM (13 years, 4 months ago) |
|
|
Yes 24/7 seems to work out just fine.
Air stones aren't needed, and you should change the water at least every two days.
--------------------
|
wishcouldeletethis
Registered: 04/20/08
Posts: 675
|
Re: DIY- Build your own Aeroponic cloner! *DELETED* [Re: Stoneth]
#574587 - 07/25/11 07:06 PM (13 years, 3 months ago) |
|
|
Post deleted by lampshadehelmetReason for deletion: d
|
HippoSex
Aero-Grower
Registered: 07/18/11
Posts: 111
Loc: Canada
Last seen: 13 years, 1 month
|
|
I haven't changed my cloner's water in three weeks. With such a low PPM, there's not all that much to screw up as long as your temps are under control.
I made the mistake of leaving a 500GPH ecoplus pump on 24/7 and it made the temps way too high. Ten days, no roots, rotting stems. Put it on 30/30 and three days later, they all rooted. Now that they have rooted, I'm just vegging them there and I have the pumps on 30 and off 60.
Awesome shit, but be careful if you're running 24/7.
|
DrUBennett
Stranger
Registered: 08/25/11
Posts: 1
Last seen: 12 years, 9 months
|
PEX Setup [Re: HippoSex]
#582399 - 08/31/11 05:55 AM (13 years, 2 months ago) |
|
|
Do you think using PEX and brass fittings would work? Alot easier to build using zero pvc or glue.
|
sonyagilman
Stranger
Registered: 10/31/11
Posts: 1
Last seen: 13 years, 26 days
|
Re: DIY- Build your own Aeroponic cloner! [Re: azshroomer]
#594808 - 10/31/11 06:31 AM (13 years, 26 days ago) |
|
|
Hi the pictures are very nice and i want to tell you that i know the store in that store you can get a better seeds in a very cheap price they also tell you about effective production,the store name is coasthydroponics.com and you can also visit online
|
PurePowerPlant1
Hallucengetic Hoe Down!
Registered: 11/03/11
Posts: 90
Loc: IN THE MIDDLE of the map
Last seen: 11 years, 10 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: sonyagilman]
#597871 - 11/21/11 02:20 PM (13 years, 4 days ago) |
|
|
i built one using these directions and a few of my own tweaks, my first aerocloner was leaking, i think i worked out the kinks though
|
linky
Stranger
Registered: 11/06/12
Posts: 1
Last seen: 11 years, 11 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: PurePowerPlant1]
#644203 - 11/06/12 10:34 AM (12 years, 19 days ago) |
|
|
Just built this last night, very nice and easy to build. thanks!
|
happykush87
Stranger
Registered: 11/16/12
Posts: 1
Last seen: 12 years, 8 days
|
Re: DIY- Build your own Aeroponic cloner! [Re: azshroomer]
#646166 - 11/16/12 10:32 AM (12 years, 9 days ago) |
|
|
okay so i have built this cloning box my problem is what kind of pump too use.
i seen yours is 396 gph. mines a 400 gph. the one i have wont spray out what did ytou do and where do i get the submersable pump.
|
camplo
Stranger
Registered: 05/14/11
Posts: 29
Last seen: 11 years, 9 months
|
|
Why can't I use this "cloner" to take the plant to fruition. And if its the dimensions that are too limiting, then would it be possible to build a unit that was capable of taking the plant from tiny plant thing to fruiting plant thing.
camplo
ps- here I was thinking I was all cool and original. Your design is exactly what I was dreaming up. Nice work.
|
boneynerd
Stranger
Registered: 01/21/13
Posts: 36
Last seen: 11 years, 6 months
|
Re: DIY- Build your own Aeroponic cloner! [Re: Tank333]
#668499 - 04/30/13 07:17 PM (11 years, 6 months ago) |
|
|
I use a bucket, same setup.. never found a decent seal for tubs that didn't leak water somehow..
also, im considering doing away with the net pots their fucking pointless, just make the hole a little bit smaller so you can put just the neoprene piece in.
other then that, same shit different day.. fun project, for $50 you can get a 14 site cloner bucket setup and running.
|
P-O
Registered: 10/08/11
Posts: 17,891
|
Re: DIY- Build your own Aeroponic cloner! [Re: boneynerd]
#668963 - 05/03/13 11:33 AM (11 years, 6 months ago) |
|
|
i like diy stuff...
nice thread 
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
