|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
 "Budder" From BHO 
#499053 - 11/18/10 09:44 AM (14 years, 1 month ago) |
|
|
I have made BHO a few times, but just recently found out about this budder thing and whipping the oil into a more handlable texture
So i tried it lastnight with an ounce of bud and 6 cans of vector butane. I got a good amount of oil and decided to whip it
It wouldn't really change from oily to non-oily and i was getting confused, but all of the sudden i noticed it wouldnt re-melt from floating it on hot(165F) water,...but that it was a whole new texture.
It changed from oil to a gunk that when scraped just collects perfectly into a touchable ball of "budder"
My question is what is the difference between "budder" and normal BHO? Because i now have a nice ball of it..+more
|
 Dr. Siekadellyk
Question Everything!
 
Registered: 04/20/09
Posts: 9,365
Loc: Ketamine 
|
|
Quote:
My question is what is the difference between "budder" and normal BHO?
Well by what I've gathered "Budder" is BHO thats just been heated and whipped into a putty that's able to handled easier...
--------------------
The Kratom Report...
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
|
Quote:
Dr. Siekadellyk said:
Quote:
My question is what is the difference between "budder" and normal BHO?
Well by what I've gathered "Budder" is BHO thats just been heated and whipped into a putty that's able to handled easier...
It tis Phyre
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
|
Quote:
Dr. Siekadellyk said:
Quote:
My question is what is the difference between "budder" and normal BHO?
Well by what I've gathered "Budder" is BHO thats just been heated and whipped into a putty that's able to handled easier...
i think it kinda condenses it a bit...to where what you thought was a little bit, is actually more because it was whipped and condensed, ..making it "more potent" per little piece of it
|
Psuper
حشيش حشّاشين
Registered: 04/21/08
Posts: 265
Loc: Left Coast
Last seen: 3 years, 9 months
|
|
While folks do sometimes simply whip BHO with a little heat to make a putty, what is termed "budder" is "kif, hash, or high-crystal organic buds" that has undergone isomerization and is than whipped or "tooled".
Here is a link to a published article that explains kind of what this is and where it comes from:
http://cannabisculture.com/articles/3589.html
I don't know that the exact technique is known outside of their circle of people. Budderking even has certain genetics of plants in his possession which are said to be preferred for this process.
Budder isn't simply "cleaned-up", just whipped, frozen, or only isomerized. It's all that. As that article linked explains samples of budder from Budderking were analyzed by a laboratory in CA and one in particular was found to be %99 THC. ~P~
--------------------
Shroomery.org
|
Psuper
حشيش حشّاشين
Registered: 04/21/08
Posts: 265
Loc: Left Coast
Last seen: 3 years, 9 months
|
|
Quote:
Psuper said:
While folks do sometimes simply whip BHO with a little heat to make a putty, what is termed "budder" is "kif, hash, or high-crystal organic buds" that has undergone isomerization and is than whipped or "tooled".
Here is a link to a published article that explains kind of what this is and where it comes from:
http://cannabisculture.com/articles/3589.html
I don't know that the exact technique is known outside of their circle of people. Budderking even has certain genetics of plants in his possession which are said to be preferred for this process.
Budder isn't simply "cleaned-up", just whipped, frozen, or only isomerized. It's all that. As that article linked explains samples of budder from Budderking were analyzed by a laboratory in CA and one in particular was found to be %99 THC. ~P~
I need to add a couple points to this post I made:
A lot of folks are wondering how this stuff could actually be %99 pure if it isn't a completely clear substance. That article makes some big claims and you have to trust what the "science" is saying without having all the science broken down in front of you, which is of course impractical in an article of that scope.
Budder supposedly isn't made with a specific type of oil or hash. But it is done best with specific genetics.
So budder is oil that has been through isomerization and isn't produced well by many strains of cannabis. If you are looking to "whip" oils some folks around the internetz are reporting/claiming that this also is best done with certain genetics but I have personally seen at least some kind of desirable result/texture come from whipping/tooling high-quality BHO and differing grades of iso.
Now, that being said, you also need to go with Dr. Siekadellyk's definition above:
Quote:
Dr. Siekadellyk said:
Well by what I've gathered "Budder" is BHO thats just been heated and whipped into a putty that's able to handled easier...
...because that is how many, many people are using the term. Folks are "buddering" both iso and butane oil.
I think it's fair to predict that folks are not going to stop using the term to denote one or the other product, and that there indeed stands two separate connotations of the term.
--------------------
Shroomery.org
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
 Re: "Budder" From BHO [Re: Psuper]
#499882 - 11/21/10 10:24 AM (14 years, 1 month ago) |
|
|
Well it surely is mind blowingly potent
My friend bought an oil dome and nail...I love it
|
psyberpunk
Lunatic
Registered: 11/02/10
Posts: 533
Loc: Behind a Pipe
|
|
I would be eager to try some budder. I just heard of it yesterday from some video on YouTube.
It's this guy that someone else posted smoking bongs yesterday.
Edited by psyberpunk (11/23/10 01:48 PM)
|
Ero42oH2o
master of the bush
Registered: 04/30/09
Posts: 450
Last seen: 13 years, 9 months
|
|
IT has changed to a more handelable texture.(heat and time)
also
I collect, Then re add a little iso alcohol to re-liquify, a few drops of h2o to bind to butane contaminates, and then put that into an oil bath at 220 to evaporate out the b/s, whipping it the whold time.
I didnt hear you mention you whip it.
I do that untill it smells like humoldt tincture then scrape it up. Almost like heroin at that point and the thc potencte breaks the rictor scale. Once dry ( a few seconds so collect hot) It breaks like heroin, goo but snaps( if you know what I mean) but completly handelable even when warmed.
I think the change to a butter is more time, heat, or strain, because those are the things that made mine like that(accidently cooking it to long) but maybe im wrong.
Hey that stuff, if you add to a bit of 220 proof and make a tincture.
nuff said!!!!
--------------------
All of the statements and posts I make or have made are fake. I just found all the pictures and copied and pasted them here. I am in no way associated with any of the materials discussed here. I'm just bored, and lame.
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
|
Quote:
Ero42oH2o said:
I collect, Then re add a little iso alcohol to re-liquify, a few drops of h2o to bind to butane contaminates, and then put that into an oil bath at 220 to evaporate out the b/s, whipping it the whold time.
Explain the iso alcohol step for me...i always worry about butane contams and would like to know how re-dissolving the oil in iso alcohol and adding a few drops of water and then re-evaporating could get rid of the butane contams? How?
|
Psuper
حشيش حشّاشين
Registered: 04/21/08
Posts: 265
Loc: Left Coast
Last seen: 3 years, 9 months
|
|
Quote:
OregonChronic said:
Quote:
Ero42oH2o said:
I collect, Then re add a little iso alcohol to re-liquify, a few drops of h2o to bind to butane contaminates, and then put that into an oil bath at 220 to evaporate out the b/s, whipping it the whold time.
Explain the iso alcohol step for me...i always worry about butane contams and would like to know how re-dissolving the oil in iso alcohol and adding a few drops of water and then re-evaporating could get rid of the butane contams? How?
If you were worried that the butane had not been completely purged from the oil you could redissolve in iso and start evaporating again. Butane purges at a lower temperature than alcohol does so you would be assured that any butane would have evaporated out upon finishing the alcohol purge. This could take a little from some of the desirable flavors in the BHO.
The oil bath can get hotter and stay warmer longer than a hot water bath. Also the oil bath is steam, condensation free.
As far as water binding to some contaminants in butane Iam not sure about this, perhaps Ero42oH2o could expand on what he means. Iam also not sure why you would add water to alcohol instead of just using a lower-proof bottle of alcohol to start with.
--------------------
Shroomery.org
|
Ero42oH2o
master of the bush
Registered: 04/30/09
Posts: 450
Last seen: 13 years, 9 months
|
Re: [Re: Psuper]
#503134 - 12/04/10 10:51 PM (14 years, 26 days ago) |
|
|
Hahaha
I keep high proof alcohol around. But yea i thought about the pre mix.
I got this info from Reading "Cannabis Alchemy" Shit really brings it way down.
http://www.scribd.com/doc/31388356/Cannabis-Alchemy-D-Gold
From experience if you add the water it comes out cleaner.
I've done alot of different ways.
+Just 220deg oil bath( i do it in the oil, with rope in the oil to keep the hash containing pyrex off the heating element.
+or re wetting with alcohol, and doing a charcoal filter.(sucked)
And the best
+220deg oil bath with enough alcohol to re wet the stuff.
And maybe 4 drops of h20 per expected gram.
also doing the steps in a timely manner seems important, and with nothing less than a coffee filter for removing plant material.
sorry my reply is jumbled, i was drinking moonshine last night, and I just got over a 12 hr hangover.
Read the link, it's cool and maybe it explains what I didn't.
I heard that the contam's in butane bind to water from a few chemists I know. Maybe they are insane, well definatly, but they make good shit so I follow.
--------------------
All of the statements and posts I make or have made are fake. I just found all the pictures and copied and pasted them here. I am in no way associated with any of the materials discussed here. I'm just bored, and lame.
Edited by Ero42oH2o (12/04/10 10:53 PM)
|
impgl
Registered: 04/20/08
Posts: 1,666
Last seen: 11 years, 9 months
|
|
alright so does anyone have a tek or link on how to make budder/ BHO?
--------------------
|
jkell
Midnight toker
Registered: 10/29/10
Posts: 512
Loc: Don' worry bout it
Last seen: 5 years, 8 months
|
Re: "Budder" From BHO [Re: impgl]
#508699 - 12/25/10 03:40 AM (14 years, 6 days ago) |
|
|
Search BHO Hash or Butane hash or any combo of the two and your guaranteed a result. Happy searching 
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
Re: "Budder" From BHO [Re: impgl]
#508946 - 12/26/10 02:30 PM (14 years, 5 days ago) |
|
|
Quote:
impgl said:
alright so does anyone have a tek or link on how to make budder/ BHO?
I just pack either a half gallon milk jug or a glass turkey baster full with bud,...because a milk jug is HDPE plastic and it handles butane. A glass turkey baster with the rubber thing taken off can be used too.
So basically just spray butane through either a washed half gallon chocolate milk jug filled with weed or a glass turkey baster filled with weed or a stainless steel tube filled with weed.
Just put the little nozzle that comes with the butane tips in the milk jug or stainless steel tube or glass turkey baster and spray butane through it to let drip through a coffee filter out the other end and into a evaporation bowl
I just take the rubber squeeze thing off a glass turkey baster and pack with weed and spray butane through the skinny end and let it drip through a coffee filter out the wide end into a bowl to evap over hot water(dont let butane overboil).
And after all the butane evaps outside over hot water, take it inside and let the last bubbles pop by floating the bowl on 170F water. When you think all the butane has evaporated and all the bubbles have popped, just start "whipping it" with a butter knife or flathead screwdriver until it turns into a more "hardened" form.
Just keep stirring it or "whipping it" in circles and such over the hot water and soon it should harden into "budder". It can take a suprisingly long time to whip into budder sometimes
Just make sure any hot water you use to heat from the bottom isn't over 200F...I say purge it over 170F water and it works PERFECT.
Here's a vid on it
|
Psuper
حشيش حشّاشين
Registered: 04/21/08
Posts: 265
Loc: Left Coast
Last seen: 3 years, 9 months
|
|
I like the idea of using a small glass baster OregonChronic. Though around here the glass shops sell little, and large, tubes that are made specifically for this process. Many headshops, glass shops may be keeping these out of display and sometimes you have to ask to be shown them.
--------------------
Shroomery.org
|
Psuper
حشيش حشّاشين
Registered: 04/21/08
Posts: 265
Loc: Left Coast
Last seen: 3 years, 9 months
|
Re: "Budder" From BHO [Re: Psuper]
#510014 - 12/30/10 05:37 PM (14 years, 1 day ago) |
|
|
Here's an excerpt on isomerization of cannabis from an article on cannabis.com:
Direct isomerization
Sometimes if pot is totally rank and crappy, or you're dealing with a bunch of roaches, trimmings, or some other inferior source of THC it is desirable to go well beyond what a simple volatile solvent or super critical fluid extraction can do. You want to convert all those free available cannibidiols into more potent THC analogs and cannabinols.
This technique also will render a fully decarboxylized end product, as well as destroying many terpenes and aromatics which can improve or destroy a product depending on the original quality. It is important to understand this is not a full conversion to ƒ´9-THC, but to THC analogs and more active cannibidiols, and is included in this discussion more as an educational exercise. Basic isomerization takes place with a quick reflux of your cannabinoids in the presence of any H+ source (acid).
1. Treat your stuff as if it were a volatile solvent or critical fluid extraction.
2. With the remaining resin, dissolve it in a non-polar solvent. Be sure to use one that separates easily from water such as naphia or white gas.
3. Treat this mixture with sulphuric or hydrochloric acid until a pH around 1-2 is reached (approximately one drop of concentrated acid per gram of extract).
4. Place this in a reflux apparatus and cook it for about an hour. In case you¡¦re not familiar this is basically just Pyrex breaker with a large looped tube plugged into the top. This will cause the solution inside to be exposed to elevated pressures as well as temperatures, as well as preserving all of the original contents. Simply simply boiling the mixture in a small strong covered vessel can mimic it.
5. Wash what¡¦s left with water, keep the oil layer.
6. Neutralize your mix (bring it to pH 7.0) with a little Sodium Hydroxide solution (pH 9.0) or baking soda then rewash it with water. Save the oil layer again.
7. Allow your oil to evaporate and you should be left with a sticky amber liquid that contains almost pure THC.
I would recommend an extraction for a starting point, since if you start clean your product can only get much better. Once you¡¦ve obtained nearly pure THC, converting it to an acetate is supposed to produce more psychedelic like effects.
More THC analog modifications can be made (to yield pure ƒ´9 or ƒ´6 THC), but generally the consumption of the original products in these reactions makes them hardly worth while (usually 5-20% yeild, so it may be half as psychoactive but you have 5 times as much of it in the beginning).
Here's a link to the complete article:
http://www.cannabis.com/growing/hashish-a-summary-of-hash-extraction-methods.html
--------------------
Shroomery.org
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
Re: "Budder" From BHO [Re: Psuper]
#510654 - 01/02/11 09:19 PM (13 years, 11 months ago) |
|
|
I aint fuckin with none of that  Shit extractin dmt creeped me out with all that sodium hydroxide and naphtha so i went the organic way with pickling lime and d-limonene.
I dont need no more sodium hydroxide or naphtha for any extractions. Even using Vector butane, as pure as it is,...to make my oil creeps me out because it still leaves behind some white stain on a mirror when sprayed.
The day i find a source of PURE N-Butane that evaporates cleanly when sprayed on a mirror will be the day pigs fly.
Anyone know where i could probably get some PURE n-butane?
|
mattyyy
Registered: 01/08/09
Posts: 20
Last seen: 11 years, 7 months
|
|
Quote:
OregonChronic said:
I aint fuckin with none of that Shit extractin dmt creeped me out with all that sodium hydroxide and naphtha so i went the organic way with pickling lime and d-limonene.
I dont need no more sodium hydroxide or naphtha for any extractions. Even using Vector butane, as pure as it is,...to make my oil creeps me out because it still leaves behind some white stain on a mirror when sprayed.
The day i find a source of PURE N-Butane that evaporates cleanly when sprayed on a mirror will be the day pigs fly.
Anyone know where i could probably get some PURE n-butane?
I don't know, I've had the same problem so I just stick to alcohol extractions for the most part, plenty potent IMO .
|
OregonChronic
State of Jefferson
Registered: 09/12/10
Posts: 72
Loc: Oregon
Last seen: 11 years, 10 months
|
Re: "Budder" From BHO [Re: mattyyy]
#520730 - 01/29/11 01:29 PM (13 years, 10 months ago) |
|
|
I would do an alcohol extract and then dissolve the alcohol extract with d-limonene and do a water wash on the d-limo
Dissolve your alcohol oil which should be chlorphyllic, into some d-limonene and then add the saturated d-limonene to a half pint of water
Mix good and let seperate so the water can leach the chlorphyll out the d-limo and then seperate the d-limo off the top with a turkey baster and evaporate
...Just something i thought of while blazin
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
