|
 FurrowedBrow
Free yourself from yourself
 
Registered: 04/20/08
Posts: 12,045
Loc: Carpal Tunnel
|
 Re: 12 hours of trimming yesterday  [Re: Harry_Ba11sach]
#425743 - 05/29/10 08:58 PM (14 years, 6 months ago) |
|
|
2 dry lbs? under 1000watts?
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal 
|
Re: 12 hours of trimming yesterday [Re: FurrowedBrow]
#425754 - 05/29/10 09:05 PM (14 years, 6 months ago) |
|
|
under two 600W's. I'm thinking closer to 3lbs now that I see it all hanging up to dry.
--------------------
|
FurrowedBrow
Free yourself from yourself
Registered: 04/20/08
Posts: 12,045
Loc: Carpal Tunnel
|
Re: 12 hours of trimming yesterday [Re: Harry_Ba11sach]
#425778 - 05/29/10 09:22 PM (14 years, 6 months ago) |
|
|
shit mayn, dont forget to post the money shots.
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: 12 hours of trimming yesterday [Re: FurrowedBrow]
#425780 - 05/29/10 09:24 PM (14 years, 6 months ago) |
|
|
Oh I will, but I'm saving them until the first like we talked about 
--------------------
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: 12 hours of trimming yesterday [Re: Harry_Ba11sach]
#425782 - 05/29/10 09:25 PM (14 years, 6 months ago) |
|
|
I've got some awesome pics this round though. The flo is going to make you blow a load
--------------------
|
FurrowedBrow
Free yourself from yourself
Registered: 04/20/08
Posts: 12,045
Loc: Carpal Tunnel
|
Re: 12 hours of trimming yesterday [Re: Harry_Ba11sach]
#425789 - 05/29/10 09:29 PM (14 years, 6 months ago) |
|
|
Quote:
Harry_Ba11sach said:
Oh I will, but I'm saving them until the first like we talked about
 I had forgotten. It's like resisting the orgasm for as long as ya can just so when you do blow it's epic.
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: 12 hours of trimming yesterday [Re: FurrowedBrow]
#425795 - 05/29/10 09:31 PM (14 years, 6 months ago) |
|
|
oh it'll be epic alright. You wont' believe the lavender colors I got on the flo in the last couple weeks. easily the most colorful stuff I've ever grown and that's really saying something when you look at the maneater I grew this round. Trich coverage so thick you literally can't see green
--------------------
|
 Jeff Funk
Registered: 04/08/09
Posts: 546
Last seen: 8 years, 7 months
|
Re: 12 hours of trimming yesterday [Re: Harry_Ba11sach]
#425830 - 05/29/10 10:30 PM (14 years, 6 months ago) |
|
|
Damn thats a nice yield off 9 plants! I hope I come close on my next grow!
--------------------
@Str8dankgenetics
|
Steve Buscemi
Registered: 11/15/08
Posts: 2,167
Last seen: 12 years, 3 months
|
Re: 12 hours of trimming yesterday [Re: Harry_Ba11sach]
#426146 - 05/30/10 08:02 PM (14 years, 6 months ago) |
|
|
Was the odor a problem..... looks like a very small space. what are you running for ventilation?
Could this project be pulled off in an apartment?
|
Inverted
CNC Machinist/Greenthumb
Registered: 06/01/08
Posts: 9,953
Loc: North Star
|
Re: 12 hours of trimming yesterday [Re: Steve Buscemi]
#426150 - 05/30/10 08:08 PM (14 years, 6 months ago) |
|
|
Yes it could if you kept the grow sealed off by either modifying a large closet or simply buying a tent... Obviously an adequate carbon filter is a must for apartment grows. Maybe FurrowedBrow can tell you something about the cautions of that situation.
--------------------
Don't criticize what you can't understand
|
Steve Buscemi
Registered: 11/15/08
Posts: 2,167
Last seen: 12 years, 3 months
|
Re: 12 hours of trimming yesterday [Re: Inverted]
#426169 - 05/30/10 08:45 PM (14 years, 6 months ago) |
|
|
Sounds like I'm in for a good anecdote.
|
Jeff Funk
Registered: 04/08/09
Posts: 546
Last seen: 8 years, 7 months
|
Re: 12 hours of trimming yesterday [Re: Steve Buscemi]
#426187 - 05/30/10 09:15 PM (14 years, 6 months ago) |
|
|
Quote:
It's absolutely not. I'm approaching 36 hours today and I'm hella fucking sick of it. I think I'm investing in a trimming machine after this grow, I"m dead ass tired
Hey harry before you invest in a trimmer check out this DIY first.
http://www.michiganmedicalmarijuana.org/index.php?app=tuts&module=tuts§ion=tuts&t_id=27
--------------------
@Str8dankgenetics
|
Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,050
Loc: No where ville, USA
|
Re: 12 hours of trimming yesterday [Re: Jeff Funk]
#426263 - 05/30/10 10:33 PM (14 years, 6 months ago) |
|
|
Quote:
You Do not Have Access to MMMA Tutorials
Copy and Paste please good sir.
--------------------
|
Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal
|
Re: 12 hours of trimming yesterday [Re: Stoneth]
#426304 - 05/30/10 11:43 PM (14 years, 6 months ago) |
|
|
Quote:
stoney.69 said:
Quote:
You Do not Have Access to MMMA Tutorials
Copy and Paste please good sir.
Agreed, I'd love to read it but I don't want to make an account
--------------------
|
Jeff Funk
Registered: 04/08/09
Posts: 546
Last seen: 8 years, 7 months
|
Re: 12 hours of trimming yesterday [Re: Stoneth]
#426308 - 05/30/10 11:52 PM (14 years, 6 months ago) |
|
|
Here ya go...
Home Made Auto TrimmerAlright for those who are a little on the lax, lazy, or just want to safe some time trimming this tutorial is going to go over how one can convert a simple inline duct fan into a auto trimming machine for a few bucks!! First the supplies needed.
1.)4,6,8,10, OR 12" Inline duct fan, must not be the plastic bladed types they will not work, if they do work it won't be very good!
2.)Gardners mesh or a screen with large holes of some sort, Don't be picky about this but something that will allow trim leaves to pass through without letting your fingers and buds get passed.
3.)a perforated bag, old lawnmower bag will work, canvas or burlap sacks will as well. Something that will let air pass through it but not trimmings as such.
Now the How-to Part of things,
1.) Take your fan and figure out which way the air flows, you want it to draw air from the top, blow it out of the bottom.
2.) Cut off as much of the housing as possible so you're as close to the fans blades as you can be, should be less then a 1/4 clearance just enough so the blades don't scrape against the screen/mesh
3.) Now take a little 300grit sand paper (more or less works as well, I have 300grit laying around my shop everywhere) Sand the edges of the blades to give them a bit of a sharp edge, doesn't have to be a razor but the sharper the better.
4.) Attach your screen/mesh to the top side. Metal duct tape works well, something thats not permanent because you will have to clean the blades every once in a great while. This screen will save your fingers and nugs from potential damage and make things much easier for you.
5.) Get a hose clamp, T clamp is preferred, it will hold better and be quicker to snap on and off. However a normal hose clamp will be just fine as well. Use that clamp to clamp your bag on other end of the fan, and take a step back and look at your creation, it should feel good.
Optional things
Making a Table to mount it into.
1.)Particle board, the cheaper the better, this is just going to get hacked up.
2.)Sawzall or giant hole saw, routers work pretty well too.
3.)Some legs, 2x4's are great if you have scrap lying around if not, get some broom handles or old table legs from somebodies garbage.
4.)2 part epoxy
1.) Take the particle board and saw your hole into it, the same Diameter as the inline fan, you may have to notch it for the motor depending on if its inside or outside.
2.) Attach your legs to the particle board, make sure its nice and sturdy, sometimes bracing in between the begs helps a lot, run a board along the underside edge from leg to leg, put screws in these and then use some of the 2 part epoxy to give it an extra hold around the seam.
3.) Coat the top edge of the fan in 2part epoxy, as well as the hole cut into the table, you basically get one shot at this because most epoxy cure and don't let go...
4.)Mount your fan from the underside so that the top edge is flush or as flush as you can make it, then attach the bag on the underside of the fan and BAM! trimming table complete.
Time to trim!
1.) Take your freshly cut bud and hang it for a few days, just long enough to let the trim leaves and fan leaves dry out a bit, some people like to leave it all on until its ready for cure, I never do, but most times very fresh trim isn't going to work to well with the fan either.
2.) Take all your buds and set them on the table, now place one on the mesh and slowly rotate it making sure the leaves are going through the openings and not bushing up. Everyone will find a different method to do this, none of them are wrong its what works for you.
3.) Get your pruning scissors, I know you thought you weren't gonna have to do this... well you don't but no auto trimmer is that perfect If you're like me you want you're buds to look like this when you're all done.
http://
Thanks goes to Jipo
--------------------
@Str8dankgenetics
Edited by Jeff Funk (05/31/10 12:02 AM)
|
Jeff Funk
Registered: 04/08/09
Posts: 546
Last seen: 8 years, 7 months
|
Re: 12 hours of trimming yesterday [Re: Harry_Ba11sach]
#426364 - 05/31/10 07:04 AM (14 years, 6 months ago) |
|
|
Quote:
Harry_Ba11sach said:
Floranova base nutrients from General Hydroponics and I'm using Floralicious Bloom, Florablend, Snowstorm Ultra, Koolbloom liquid and powder and AN sweet.
Is snowstorm used for more trichome production? How much and how often do you use Snowstorm Ultra throughout a grow? I'm looking to add this to my next grow as well.
--------------------
@Str8dankgenetics
|
FurrowedBrow
Free yourself from yourself
Registered: 04/20/08
Posts: 12,045
Loc: Carpal Tunnel
|
Re: 12 hours of trimming yesterday [Re: Jeff Funk]
#426367 - 05/31/10 07:26 AM (14 years, 6 months ago) |
|
|
My head gets dizzy when i think about nutes for cannabis. 
|
Jeff Funk
Registered: 04/08/09
Posts: 546
Last seen: 8 years, 7 months
|
Re: 12 hours of trimming yesterday [Re: FurrowedBrow]
#426375 - 05/31/10 08:23 AM (14 years, 6 months ago) |
|
|
Quote:
FurrowedBrow said:
My head gets dizzy when i think about nutes for cannabis.
Lol tell me about it. Theres always something new out there, or you see a good harvest like above and wanna try something new. I've been thinking about using Snowstorm and Gravity for a while. But I think I'm just gonna try the Snowstorm, and see how my bud density is on my next grow without the gravity.
--------------------
@Str8dankgenetics
|
Jeff Funk
Registered: 04/08/09
Posts: 546
Last seen: 8 years, 7 months
|
Re: 12 hours of trimming yesterday [Re: Jeff Funk]
#426819 - 06/01/10 07:15 AM (14 years, 6 months ago) |
|
|
I'm anxious to build this thing going to pick up some supplies today.
--------------------
@Str8dankgenetics
|
Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,050
Loc: No where ville, USA
|
Re: 12 hours of trimming yesterday [Re: Jeff Funk]
#426883 - 06/01/10 01:32 PM (14 years, 6 months ago) |
|
|
Quote:
Jeff Funk said:
Quote:
Harry_Ba11sach said:
Floranova base nutrients from General Hydroponics and I'm using Floralicious Bloom, Florablend, Snowstorm Ultra, Koolbloom liquid and powder and AN sweet.
Is snowstorm used for more trichome production? How much and how often do you use Snowstorm Ultra throughout a grow? I'm looking to add this to my next grow as well.
I have used 2 to 5 mls per gallon per feeding all the way thru flowering.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
