|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 starspangled
Stranger
Registered: 02/21/10
Posts: 27
Last seen: 11 years, 11 months
|
 new 600 light stopped working after 3 weeks- any advice? 
#391083 - 03/28/10 10:41 AM (14 years, 7 months ago) |
|
|
i recently bought a new 600 as a sister for the one in already had. this one i bought has a metal ballast that hums quite and also was hot to touch. this morning it did not kick on so i changed fuses.still nothing.the power is running through the same 4-way as the other light and that is working fine.
i know nothing about how to fix a broken ballast if that is what it is.
the ballast makes no noise at all when plugged in with tested fuse.
what to do? if anyone can help me with this it would be a great help,
all the best
|
 Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal 
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: starspangled]
#391088 - 03/28/10 10:51 AM (14 years, 7 months ago) |
|
|
I think it sounds like you need to just get it exchanged. faulty ballasts like that should be covered under the manufacturers warranty since you've only had it for 3 weeks
--------------------
|
coda
Registered: 04/20/08
Posts: 4,736
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: Harry_Ba11sach]
#391103 - 03/28/10 11:13 AM (14 years, 7 months ago) |
|
|
Was it a magnetic ballast? Probably a blown capacitor.
--------------------
MFDoom666: sobriety kills my buzz every time.
|
starspangled
Stranger
Registered: 02/21/10
Posts: 27
Last seen: 11 years, 11 months
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: coda]
#391114 - 03/28/10 11:32 AM (14 years, 7 months ago) |
|
|
thanks for the replies-i bought this off ebay - will have to contact the seller. it has a local hardware store plug on it so they might have put it together themselves. if they won't exchange it can i simply replace the ballast for a modern one?
|
DieselB
High Watt Closet
Registered: 02/10/10
Posts: 1,156
Last seen: 9 years, 8 months
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: starspangled]
#391115 - 03/28/10 11:47 AM (14 years, 7 months ago) |
|
|
If they won't replace it, you should fight them on it. If you just wanna get a new one, keep in mind different sockets have different plugs that may not match up to the new unit. If you're handy it would be easy to just swap the old style plug from the broken unit to the new ballast, or really I think they make adapters, then you wouldn't void any warranty by opening the unit.
--------------------
If you ain't smokin' dro, you're smokin' reggie. 
|
coda
Registered: 04/20/08
Posts: 4,736
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: DieselB]
#391122 - 03/28/10 12:32 PM (14 years, 7 months ago) |
|
|
Don't think the problem is caused by a faulty plug. If you bought some homemade ballast, well, most likely you're shit out of luck here. I always follow the "you get what you pay for" rule when buying equipment. Sometimes it's better to spend the extra dough rather then try and skimp on an integral part of your grow.
--------------------
MFDoom666: sobriety kills my buzz every time.
|
starspangled
Stranger
Registered: 02/21/10
Posts: 27
Last seen: 11 years, 11 months
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: coda]
#391131 - 03/28/10 12:48 PM (14 years, 7 months ago) |
|
|
yeah, i didn't look at the listing properly and was dissapointed it was the old style ballast.still it should have worked- i will fight them if they don't replace it:)
thanks for the replies
|
DieselB
High Watt Closet
Registered: 02/10/10
Posts: 1,156
Last seen: 9 years, 8 months
|
Re: new 600 light stopped working after 3 weeks- any advice? [Re: starspangled]
#391971 - 03/28/10 11:42 PM (14 years, 7 months ago) |
|
|
Were you saying you changed house fuses, or the actual ballast fuse?
--------------------
If you ain't smokin' dro, you're smokin' reggie.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
