|
 Killuminati_420
Swimmin in Cyans soon
Registered: 09/25/09
Posts: 154
Loc: Oregon Coast
Last seen: 14 years, 2 months
|
 95% Grain Alcahol..Hash Oil 
#381914 - 03/11/10 12:48 PM (14 years, 8 months ago) |
|
|
Ive been attempting to make honey oil recently and did it the butane way a couple times, resulting in stinky and shitty oil infested with impurities because i used Ronsonol...DO NOT use ronsonol butane EVER because it has sulfur dioxide in it i read on google But anyway, i dont know where to get any hexane so i bought some 95% grain alcahol and filled a qt jar halfway with trim, and poured in the alcahol until it floated it and ive been shaking it for about 25mins now and im wondering when im supposed to seperate the alcahol and evaporate???
--------------------
http://www.youtube.com/watch?v=w5Rw_1nRuu0
  
Amanitas for Trade this Oct-Dec^
"Dont gain the world and lose your soul...Wisdom is better than silver and gold" -Bob Marley
|
NobodyImportant
Science Is Subculture
Registered: 05/03/08
Posts: 4,981
Loc: Jawjuh.
Last seen: 11 years, 7 months
|
|
Do it now
if you let it sit too long it will get full of chlorophyll
If you dont get all the hash out you can always do another pull, but its better to not leave it in too long
--------------------
 
Glass By: US Tubes, ZOB, Roor.de, Sheldon Black, Jerome Baker, Medicali, Kennaroo, Sand, Alex K, Local and Unknown Artists
|
 Harry_Ba11sach
cannoisseur
Registered: 04/20/08
Posts: 11,753
Loc: Nepal 
|
|
Quote:
NobodyImportant said:
Do it now
if you let it sit too long it will get full of chlorophyll
If you dont get all the hash out you can always do another pull, but its better to not leave it in too long
--------------------
|
Killuminati_420
Swimmin in Cyans soon
Registered: 09/25/09
Posts: 154
Loc: Oregon Coast
Last seen: 14 years, 2 months
|
|
Deleted
Edited by Killuminati_420 (03/11/10 02:08 PM)
|
Killuminati_420
Swimmin in Cyans soon
Registered: 09/25/09
Posts: 154
Loc: Oregon Coast
Last seen: 14 years, 2 months
|
|
So i seperated the grain alcahol and filtered it and started evaporating by floating it in a bowl on simmering water right when i read your reply, and the oil that shows on the sides immediately still has an oily texture to it   ...Its more green than butane or hexane oil would be, but it still looks pretty good 
--------------------
http://www.youtube.com/watch?v=w5Rw_1nRuu0
Amanitas for Trade this Oct-Dec^
"Dont gain the world and lose your soul...Wisdom is better than silver and gold" -Bob Marley
|
NobodyImportant
Science Is Subculture
Registered: 05/03/08
Posts: 4,981
Loc: Jawjuh.
Last seen: 11 years, 7 months
|
|
Be careful evaporating that, sounds like your doing it indoors
thats lots and lots of explosive gas being evaporated into your place
Vent it out a window as much as you can
--------------------
Glass By: US Tubes, ZOB, Roor.de, Sheldon Black, Jerome Baker, Medicali, Kennaroo, Sand, Alex K, Local and Unknown Artists
|
Killuminati_420
Swimmin in Cyans soon
Registered: 09/25/09
Posts: 154
Loc: Oregon Coast
Last seen: 14 years, 2 months
|
|
I just cant wait to blaze it up on a bowl to test it out and not have to worry about butane impurities like sulfur dioxide 
--------------------
http://www.youtube.com/watch?v=w5Rw_1nRuu0
Amanitas for Trade this Oct-Dec^
"Dont gain the world and lose your soul...Wisdom is better than silver and gold" -Bob Marley
|
Killuminati_420
Swimmin in Cyans soon
Registered: 09/25/09
Posts: 154
Loc: Oregon Coast
Last seen: 14 years, 2 months
|
|
All the alcahol has evaporated, and im left with a black/green/golden goop It seems pretty potent and ima try it out right now What should i do with the trim leftover in the jar? If i added hexane to it, could i yield a more pure oil still, or did the grain alcahol for 25mins take all the THC?
--------------------
http://www.youtube.com/watch?v=w5Rw_1nRuu0
Amanitas for Trade this Oct-Dec^
"Dont gain the world and lose your soul...Wisdom is better than silver and gold" -Bob Marley
|
Harlz
Registered: 02/05/09
Posts: 4,449
Loc: cloudz
Last seen: 10 months, 8 days
|
|
well Im sure the trim was still wet with alcohol therefore covered with resin glands,
you could get more but not a lot more
|
coda
Registered: 04/20/08
Posts: 4,736
|
|
you can pick up a can of qd electrical contact cleaner if you want to use hexane. You can find it at any home depot.
--------------------
MFDoom666: sobriety kills my buzz every time.
|
Killuminati_420
Swimmin in Cyans soon
Registered: 09/25/09
Posts: 154
Loc: Oregon Coast
Last seen: 14 years, 2 months
|
 Re: 95% Grain Alcahol..Hash Oil [Re: coda]
#382421 - 03/12/10 10:44 AM (14 years, 8 months ago) |
|
|
Its chill, im probly just gonna add the rest of the alcahol, and let it soak again for awhile this time to soak all the rest of the chlorphyl and resins, evaporate all the way, and if it has too much chlorphyl, i will soak it with VM&P Naphtha and seperate and evaporate again to clean it up a bit Im gonna look for a source of Hexane for next time though to get some good oil
--------------------
http://www.youtube.com/watch?v=w5Rw_1nRuu0
Amanitas for Trade this Oct-Dec^
"Dont gain the world and lose your soul...Wisdom is better than silver and gold" -Bob Marley
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
