|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
 Re: First Grow - 400w, custom hydro flood n drain, Power Skunk & Power Haze  [Re: Inverted]
#317143 - 11/17/09 08:42 AM (15 years, 20 days ago) |
|
|
Quote:
Inverted said:
Well raising and lowering the scrog screen is defeating the point of the scrog...
You want that stationary so that the plants are forced to branch beneath, with only the tops sticking through so that everything is at one level. This can also be achieved with careful and skilled tying down techniques. As 206 said, you can get the hormones to transfer to the lower branches, thus stopping vertical growth and allowing the lower branches to become rather large and match the main top in height and cola size. Yields will be higher when done properly as well.
Well it's being mounted by chain and pulleys so that it's adjustable, but more so because I simply have nowhere accessible to really screw it down to. So I figured hanging it wouldn't be a terrible idea, and while I'm at it, I might as well install it on pulleys. I guess I would never need to adjust it. But I think it would allow for easy access in between grows. I dunno.... one way or another, it's going to be hung on chains. There's really no other way of doing it right now.
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
 Inverted
CNC Machinist/Greenthumb
 
Registered: 06/01/08
Posts: 9,953
Loc: North Star 
|
Re: First Grow - 400w, custom hydro flood n drain, Power Skunk & Power Haze [Re: TomCollins]
#317148 - 11/17/09 08:58 AM (15 years, 20 days ago) |
|
|
Haha I haven't been talking to you the entire time, i've basically just been talking to him and ignoring everyone else... I've done more than 10 grows, so I don't need to hear what anyone else has to say on the subject. Just giving helpful advice.
If you said some of the same things then 
--------------------
Don't criticize what you can't understand
|
Azyle00
Captain Canada
Registered: 10/14/09
Posts: 240
Loc: CANADA
Last seen: 14 years, 9 months
|
Re: First Grow - 400w, custom hydro flood n drain, Power Skunk & Power Haze [Re: TomCollins]
#317150 - 11/17/09 09:01 AM (15 years, 20 days ago) |
|
|
For the record, I disagree with any HST techniques, despite results, and certainly would encourage a new grower to not engage in this barbaric procedure when LST can be achieved and produce similar if not better results. While the end result of topping might produce a look that seems to say "wow it worked so well", the scientific reality of what you do to your plant is otherwise. You do not see what *could* have been when it is missing and incomplete. They thought the world was flat until science proved otherwise and even then, they killed the champion of reality.
If he is fighting you on telling him to HST plants, I do not blame him.
The rest of the advice he is simply learning and trying to decide what the best route for his own personal grow and situation.
I am still very impressed at how well his plants look given the history of his project.
Then again, perhaps the growth spurt was urine based and we were all wrong a month ago...haha.
--------------------
"I never post unless high. Well that does explain a lot then."
"The best part about going to sleep each night is knowing that my plants will have grown more when I wake up in the morning."
"I smoked it then I became so tired that my eyes shut down automatically without my consent" - My Chinese GF, Oct 23, 2009 
Starting your first GROW, things you should ask/answer before you do
Current Grow Journal
|
Inverted
CNC Machinist/Greenthumb
Registered: 06/01/08
Posts: 9,953
Loc: North Star
|
Re: First Grow - 400w, custom hydro flood n drain, Power Skunk & Power Haze [Re: Inverted]
#317151 - 11/17/09 09:02 AM (15 years, 20 days ago) |
|
|
P.S. - I still think height is going to be an issue, even the branches you tie down will still stretch to about 3-4x the length. It's going to be a huge mess in there... Oh well at least you aren't going to yield on the LOW side  Just make sure that scrog screen is heavy enough so that the plants won't move it around by growing. They can do that.
--------------------
Don't criticize what you can't understand
|
Azyle00
Captain Canada
Registered: 10/14/09
Posts: 240
Loc: CANADA
Last seen: 14 years, 9 months
|
Re: First Grow - 400w, custom hydro flood n drain, Power Skunk & Power Haze [Re: Inverted]
#317158 - 11/17/09 09:18 AM (15 years, 20 days ago) |
|
|
Oh and with those crazy plants and all the growth...hash making time!
My fav pic is where the weed looks like it is gonna grow into the power bar sockets.
I have identified the strain as well. It is the same strain from Scary Movie 2, the one that resulted in the weed monster...lol.
--------------------
"I never post unless high. Well that does explain a lot then."
"The best part about going to sleep each night is knowing that my plants will have grown more when I wake up in the morning."
"I smoked it then I became so tired that my eyes shut down automatically without my consent" - My Chinese GF, Oct 23, 2009
Starting your first GROW, things you should ask/answer before you do
Current Grow Journal
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, Power Skunk & Power Haze [Re: Azyle00]
#319591 - 11/21/09 03:27 PM (15 years, 16 days ago) |
|
|
Update
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
Inverted
CNC Machinist/Greenthumb
Registered: 06/01/08
Posts: 9,953
Loc: North Star
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TomCollins]
#320642 - 11/23/09 06:52 PM (15 years, 14 days ago) |
|
|
Nice ScrOG screen! I'm liking the way your setup looks now that you got them all tied down. You are pretty much set to flower now, looks good, just wait a few more weeks and you'll become even more obsessed.
I built a screen exactly like that, i'll take a pic of it and upload it later to my journal, be sure to check it when I update, as you'll be suprised how similar we built them.
Shouldn't be long now, you will see some serious bushing in the next 2 weeks.
--------------------
Don't criticize what you can't understand
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: Inverted]
#321913 - 11/26/09 12:38 PM (15 years, 11 days ago) |
|
|
Boom.
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
TheShroomJew23
The Chemist
Registered: 10/02/08
Posts: 739
Last seen: 13 years, 9 months
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TomCollins]
#322006 - 11/26/09 02:43 PM (15 years, 11 days ago) |
|
|
You should add some CFLs that shine up to help supplement lower bud production since its such a forest. 
--------------------
|
Azyle00
Captain Canada
Registered: 10/14/09
Posts: 240
Loc: CANADA
Last seen: 14 years, 9 months
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TheShroomJew23]
#322053 - 11/26/09 04:55 PM (15 years, 11 days ago) |
|
|
Safety "All Round" at each end of the light, fastened to the ceiling as secondary to your chaining system would be a feature I would add.
If anything goes wrong at either end, the light can fall down onto plants. You would need to be creative however to make that adjustable as well, yet independent of the other system.
It is bushing nicely.
--------------------
"I never post unless high. Well that does explain a lot then."
"The best part about going to sleep each night is knowing that my plants will have grown more when I wake up in the morning."
"I smoked it then I became so tired that my eyes shut down automatically without my consent" - My Chinese GF, Oct 23, 2009
Starting your first GROW, things you should ask/answer before you do
Current Grow Journal
|
Inverted
CNC Machinist/Greenthumb
Registered: 06/01/08
Posts: 9,953
Loc: North Star
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: Azyle00]
#322843 - 11/28/09 09:36 PM (15 years, 9 days ago) |
|
|
Nice setup, I like the cooltube and screen, looks just like mine. I just switched to flowering so i'll be weaving them through it once I finish transplanting in the next few days.
--------------------
Don't criticize what you can't understand
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: Inverted]
#322859 - 11/29/09 12:10 AM (15 years, 9 days ago) |
|
|
What do you mean by weaving?
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
Inverted
CNC Machinist/Greenthumb
Registered: 06/01/08
Posts: 9,953
Loc: North Star
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TomCollins]
#322860 - 11/29/09 12:20 AM (15 years, 9 days ago) |
|
|
You take the top and put it through the hole, then back under and up again through another hole, you repeat this process as the plant grows/stretches so the it doesn't grow vertically above the screen. That's the point of the ScrOG... It's like tying down without doing anything, it also forces the lower branching to receive more growth hormones and they catch up to the top and can be weaved through the screen when they grow big enough. Does that make sense to you?
--------------------
Don't criticize what you can't understand
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: Inverted]
#322866 - 11/29/09 01:04 AM (15 years, 9 days ago) |
|
|
It does actually and it answers a lot of questions. I've been watching the plants just grow right through the scrog and have been scratching my head, wondering if I'm doing something wrong. 
it seems like that would be über stressful for the plants, and you could actually break the stems doing that. 
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
Inverted
CNC Machinist/Greenthumb
Registered: 06/01/08
Posts: 9,953
Loc: North Star
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TomCollins]
#322872 - 11/29/09 02:33 AM (15 years, 9 days ago) |
|
|
Just be careful, that's how scrogging is done, besides the very tip of the plants should be soft and pliable. Just use your best feel and work SLOWLY.
--------------------
Don't criticize what you can't understand
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: Inverted]
#327974 - 12/07/09 04:57 AM (15 years, 1 day ago) |
|
|
Update!
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
TheShroomJew23
The Chemist
Registered: 10/02/08
Posts: 739
Last seen: 13 years, 9 months
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TomCollins]
#328566 - 12/08/09 05:22 PM (14 years, 11 months ago) |
|
|
Sell your 400w or keep it and buy a 1000w and expand your aero system, it really sucks dude that all your females are bunched to one side and not spread out.
--------------------
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TheShroomJew23]
#328757 - 12/09/09 01:01 AM (14 years, 11 months ago) |
|
|
1000watters are hard to come by locally here, I'm in the process of trying to figure out how to suspend dual cool tubes in the closet and thereby allowing me to add a 600w to the system.
It's not an aero system btw. It says that right on the title of this thread.
It does suck a bit that all the females are bunched together but that's what happened.
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
TheShroomJew23
The Chemist
Registered: 10/02/08
Posts: 739
Last seen: 13 years, 9 months
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TomCollins]
#329137 - 12/09/09 09:49 PM (14 years, 11 months ago) |
|
|
Oh your right, I was super high and drunk when I posted because I had just smoked with Doug Benson. He did a show at the theater I work at part time at 420 but of course it started late.
--------------------
|
TomCollins
Registered: 10/06/09
Posts: 2,943
Last seen: 11 months, 17 days
|
Re: First Grow - 400w, custom hydro flood n drain, scrog, Power Skunk & Power Haze (Updated 21stNov. [Re: TheShroomJew23]
#329215 - 12/10/09 01:39 AM (14 years, 11 months ago) |
|
|
Mmmhmmm.... 
Did you show him your kilo a week setup?
--------------------
andyistic said:
Ok so let me bring you idiots up to speed.
The admins are tired of this shitfest being made the joke of the weed community on the Internet.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
