|
 TrueHerbCrystal
Uncertified Oregrowian
 
Registered: 02/07/09
Posts: 1,352
Loc: Emerald City 
Last seen: 6 years, 5 months
|
 Best Cigarette Brand for Making Modified Joints 
#275061 - 09/03/09 11:02 PM (15 years, 6 months ago) |
|
|
Its been awhile since I've been here, but I've come for some expert advice from cig smokers for I am an uncool, unfiltered non-smoker...
(I hope this thread goes better than the last "cigarette" subject I did which was deleted, not closed, deleted[/b because it got "too out of control".)
Anyway, back to my question for all you Weed/Cig smokers out there: Which brand of cigarette (ex: Kools, Marbolo, etc.) is best for easily emptying out ALL the tobacco and filling it with ground-up weed?
Couple characteristics I'm looking for in the Cig's
- Tobacco is easily removed without the paper body being destroyed.
- Strong structure and near flavorless paper.
- Looks like a typical Cigarette (and not a plain white joint look-a-like).
You're probably wondering why I would want to use a cigarette instead of just roll a joint using smoker's paper, so I'll give you guys 2 good reasons...
#1. "Real" Cigarette's look less suspicious and more discrete than joints (trying to avoid getting arrested by my friendly neighborhood Po-Po).
#2. The Cig's Built-in filter makes it less harsh. - I will be using it with chicks on vacation, so I want them to hold in their hits before they give me the "Breath of Life" (when a girl passes a hit by directly to another person, hopefully another girl, on the lips). I mean, joints are the harshess way to injest marijuana, so I want to take it easy on the ladies, ya know?
So, if you know some good brands for my "stoner idea", please share with the world.
Share the Goodz,
~ TrueHerbCrystal ~
|
81renaissance
Coachella '13 KKOTY
Registered: 04/20/08
Posts: 4,182
Loc: State of Mind
Last seen: 1 year, 27 days
|
 Re: Best Cigarette Brand for Making Modified Joints [Re: TrueHerbCrystal]
#275068 - 09/03/09 11:22 PM (15 years, 6 months ago) |
|
|
breath of life has a different name where I'm from...it's called shotgunning.
You don't want a filter on your joint as it will filter out too much of the stuff you're trying to get by smoking weed, but you can roll a joint with cigarette filter paper over the end so it looks like a regular cig.
You just roll the filter part between your fingers for a second and then pull out all the fill so that you're left with the exterior of the filter only.
Also instead of filling up a smoke with weed, roll a joint with a crutch or "roach" in the end and then cover it with the paper that is normally around the filter as mentioned above.
--------------------
"So it goes."
-Kurt Vonnegut
BlueBerry_Swisher said:I want French fries. No, I want a penis French. Thank you. I'm so excited. I can not contain myself. Now I eat chocolate. It is so good. I'm trying to rub it all over myself. And then lick. Now I need a hot shower. The end.
Edited by 81renaissance (09/03/09 11:26 PM)
|
ConcreteJungle
Herbsman
Registered: 04/29/08
Posts: 667
Last seen: 15 years, 6 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: 81renaissance]
#275094 - 09/04/09 12:25 AM (15 years, 6 months ago) |
|
|
do what you want. I'm sure everyone has had the idea at some point.
--------------------
|
eTarded
Clubbed to Death...
Registered: 08/05/09
Posts: 73
Last seen: 15 years, 3 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: 81renaissance]
#275095 - 09/04/09 12:29 AM (15 years, 6 months ago) |
|
|
Parliaments would work pretty well.
The filter part of the cig is wrapped with heavier paper making it stiffer. It's a little more durable for your purposes than other cigs. I've done it a few times for a covert smoke while walking through the city. Plus, p funk menthol lights are the best cigs ever.
I've always known passing hits as a shotgun too. Breath of life is a pretty cool name tho. Around here shotgun also refers to the trick where you turn the blunt around in your mouth (so the burning end is inside your mouth) and then blow smoke through the mouth piece of the blunt into some girl's mouth.
|
ConcreteJungle
Herbsman
Registered: 04/29/08
Posts: 667
Last seen: 15 years, 6 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: eTarded]
#275096 - 09/04/09 12:31 AM (15 years, 6 months ago) |
|
|
Rolling a J takes a few seconds if you're good at it.
Possible argument.
--------------------
|
 FarBeyondDriven
Truthfully, I'm a bullshitter
Registered: 04/22/08
Posts: 13,834
Loc: Greenbow, Alabama
|
Re: Best Cigarette Brand for Making Modified Joints [Re: ConcreteJungle]
#275097 - 09/04/09 12:31 AM (15 years, 6 months ago) |
|
|
Quote:
ConcreteJungle said:
Rolling a J takes a few seconds if you're good at it.
Possible argument.
what he said
|
ezKiel
All About the Haze
Registered: 06/12/08
Posts: 2,474
Last seen: 3 years, 1 month
|
Re: Best Cigarette Brand for Making Modified Joints [Re: FarBeyondDriven]
#275105 - 09/04/09 01:35 AM (15 years, 6 months ago) |
|
|
also they even have papers that have an orange tip. just roll it cig style and stubby.
also filters remove much of the thc...
|
meatcakeman
You Have Heard of the Yetti
Registered: 04/21/08
Posts: 1,918
Last seen: 14 years, 1 month
|
Re: Best Cigarette Brand for Making Modified Joints [Re: TrueHerbCrystal]
#275149 - 09/04/09 04:08 AM (15 years, 6 months ago) |
|
|
Quote:
TrueHerbCrystal said:
Its been awhile since I've been here, but I've come for some expert advice from cig smokers for I am an uncool, unfiltered non-smoker...
(I hope this thread goes better than the last "cigarette" subject I did which was deleted, not closed, deleted[/b because it got "too out of control".)
Anyway, back to my question for all you Weed/Cig smokers out there: Which brand of cigarette (ex: Kools, Marbolo, etc.) is best for easily emptying out ALL the tobacco and filling it with ground-up weed?
Couple characteristics I'm looking for in the Cig's
- Tobacco is easily removed without the paper body being destroyed.
- Strong structure and near flavorless paper.
- Looks like a typical Cigarette (and not a plain white joint look-a-like).
You're probably wondering why I would want to use a cigarette instead of just roll a joint using smoker's paper, so I'll give you guys 2 good reasons...
#1. "Real" Cigarette's look less suspicious and more discrete than joints (trying to avoid getting arrested by my friendly neighborhood Po-Po).
#2. The Cig's Built-in filter makes it less harsh. - I will be using it with chicks on vacation, so I want them to hold in their hits before they give me the "Breath of Life" (when a girl passes a hit by directly to another person, hopefully another girl, on the lips). I mean, joints are the harshess way to injest marijuana, so I want to take it easy on the ladies, ya know?
So, if you know some good brands for my "stoner idea", please share with the world.
Share the Goodz,
~ TrueHerbCrystal ~
Can't you just buy zig zags and filters? It'd be cheaper per joint, excluding the weed of course.
And if you're really good at rolling joints, you could roll some nice J's that could pass as cigs.
I don't think it's worth the hassle to empty out cigs.
But to stay on topic, I would have to go with either Parliaments or Marlboro Mediums or 27's.
--------------------
sǝıqɐq ɹɐʇ
|
captain.koons
Failed Botanist
Registered: 06/25/08
Posts: 6,170
|
Re: Best Cigarette Brand for Making Modified Joints [Re: ezKiel]
#275150 - 09/04/09 04:09 AM (15 years, 6 months ago) |
|
|
I'm very skeptical about such a claim that cigarette filters remove thc. They don't have charcoal or anything like that.
To the OP: Why empty cigarettes, but some tubes and a tubing machine.
--------------------
TROLLS NEED LOVE TOO!
|
Ben18
Drunk Derelict
Registered: 04/22/08
Posts: 3,189
|
Re: Best Cigarette Brand for Making Modified Joints [Re: eTarded]
#275173 - 09/04/09 08:56 AM (15 years, 6 months ago) |
|
|
Quote:
captain.koons said:
I'm very skeptical about such a claim that cigarette filters remove thc. They don't have charcoal or anything like that.
I agree. I would like to see some research on this.
I have filled cigarettes plenty of times with weed and gotten very stoned.
Quote:
eTarded said:
Parliaments would work pretty well.
|
Dr. Siekadellyk
Question Everything!
Registered: 04/20/09
Posts: 9,366
Loc: Ketamine
|
Re: Best Cigarette Brand for Making Modified Joints [Re: ezKiel]
#275177 - 09/04/09 09:32 AM (15 years, 6 months ago) |
|
|
Quote:
ezKiel said:
also they even have papers that have an orange tip. just roll it cig style and stubby.
yeah or just use
--------------------
The Kratom Report...
|
NobodyImportant
Science Is Subculture
Registered: 05/03/08
Posts: 4,981
Loc: Jawjuh.
Last seen: 11 years, 10 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: Dr. Siekadellyk]
#275181 - 09/04/09 09:51 AM (15 years, 6 months ago) |
|
|
after you smoke weed through a cig filter look at the filter and rip it in half and see all the nasty shit thats stuck in it
im not saying that proves it sucks all the THC out of the smoke cause I have gotten stoned by smoking weed in cigs, but it must mean that some of the THC is getting stuck, just like resin on a bowl, except the filter catches more of it
--------------------
 
Glass By: US Tubes, ZOB, Roor.de, Sheldon Black, Jerome Baker, Medicali, Kennaroo, Sand, Alex K, Local and Unknown Artists
|
yellownotepad
Pharmaceutical Agriculturalist
Registered: 06/22/08
Posts: 1,702
Last seen: 12 years, 9 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: TrueHerbCrystal]
#275192 - 09/04/09 10:54 AM (15 years, 6 months ago) |
|
|
Quote:
TrueHerbCrystal said:
I want them to hold in their hits before they give me the "Breath of Life" (when a girl passes a hit by directly to another person, hopefully another girl, on the lips).
is this that 'hot' cousin you were asking us about a while back? i remember a whole discussion on how you wanted to hit that shit.
|
Ben18
Drunk Derelict
Registered: 04/22/08
Posts: 3,189
|
Re: Best Cigarette Brand for Making Modified Joints [Re: NobodyImportant]
#275194 - 09/04/09 11:02 AM (15 years, 6 months ago) |
|
|
possibly.
|
ezKiel
All About the Haze
Registered: 06/12/08
Posts: 2,474
Last seen: 3 years, 1 month
|
Re: Best Cigarette Brand for Making Modified Joints [Re: captain.koons]
#275225 - 09/04/09 02:21 PM (15 years, 6 months ago) |
|
|
Quote:
captain.koons said:
I'm very skeptical about such a claim that cigarette filters remove thc. They don't have charcoal or anything like that.
To the OP: Why empty cigarettes, but some tubes and a tubing machine.
they wouldnt need charcoal. the thc vapour is relatively sticky and bind easily to the filter.
while you will get enough thc to get stoned, you are wasting a not insignificant amount.
it's like smoking half a joint vs a whole one. you still get stoned off a half and have a good time, but you didnt get a full joint.
|
NobodyImportant
Science Is Subculture
Registered: 05/03/08
Posts: 4,981
Loc: Jawjuh.
Last seen: 11 years, 10 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: ezKiel]
#275235 - 09/04/09 03:21 PM (15 years, 6 months ago) |
|
|
Roor actually makes charcoal filters for bongs
I dont think charcoal would absorb THC
--------------------
Glass By: US Tubes, ZOB, Roor.de, Sheldon Black, Jerome Baker, Medicali, Kennaroo, Sand, Alex K, Local and Unknown Artists
|
yellownotepad
Pharmaceutical Agriculturalist
Registered: 06/22/08
Posts: 1,702
Last seen: 12 years, 9 months
|
Re: Best Cigarette Brand for Making Modified Joints [Re: NobodyImportant]
#275236 - 09/04/09 03:23 PM (15 years, 6 months ago) |
|
|
well thats funny because i know im not the only person using a charcoal filter to kill smell on their grow.
|
Stoneth
D.I.L.L.I.G.A.F.
Registered: 10/06/08
Posts: 25,079
Loc: No where ville, USA
|
Re: Best Cigarette Brand for Making Modified Joints [Re: yellownotepad]
#275237 - 09/04/09 03:31 PM (15 years, 6 months ago) |
|
|
That's smell tho, not THC.
--------------------
|
captain.koons
Failed Botanist
Registered: 06/25/08
Posts: 6,170
|
Re: Best Cigarette Brand for Making Modified Joints [Re: ezKiel]
#275271 - 09/04/09 05:05 PM (15 years, 6 months ago) |
|
|
time to google "is thc vapor sticky"
--------------------
TROLLS NEED LOVE TOO!
|
ezKiel
All About the Haze
Registered: 06/12/08
Posts: 2,474
Last seen: 3 years, 1 month
|
Re: Best Cigarette Brand for Making Modified Joints [Re: captain.koons]
#275360 - 09/04/09 11:02 PM (15 years, 6 months ago) |
|
|
or if you vape just take a q-tip to the inside of your hose...
im not going to argue charcoal because i dont know.
but I'm reasonably sure that the filter catches a significant amount of the buzz.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
First Grow Journal
