|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 erikm
Stranger
Registered: 07/02/09
Posts: 81
Last seen: 11 years, 6 months
|
 Need some help with what exaust fan to get 
#274507 - 09/02/09 07:32 PM (15 years, 3 months ago) |
|
|
So, I have a very small area. Its measurements are 2x2x3. Now, I found a formula that says Cubic feet/3 (3 air exchanges per minute). So my area would be 12 cubic feet. According to that formula, that's only 4 CFM required. Throw on the carbon filter which adds I hear about 20%, so that's a total of about 5 CFM's. Now, that seems COMPLETELY wrong. I'm assuming theres a minimum CFM to pull through a small carbon filter? I'm also assuming I realllly misunderstood something. Can you guys offer me any help here? Thanks a lot
|
BlzdLivng
Registered: 03/14/09
Posts: 54
Last seen: 14 years, 4 months
|
 Re: Need some help with what exhaust fan to get [Re: erikm]
#274557 - 09/02/09 08:54 PM (15 years, 3 months ago) |
|
|
what kind of lights are you running? If a HID you'll need a better fan to keep the area cool. I'm assuming your using either fl or cfl and in that case just about any vent fan that will work with your filter would be good. Get a fan based on what your filter requires. That is the best use of the filtration.
|
erikm
Stranger
Registered: 07/02/09
Posts: 81
Last seen: 11 years, 6 months
|
Re: Need some help with what exhaust fan to get [Re: BlzdLivng]
#274569 - 09/02/09 09:09 PM (15 years, 3 months ago) |
|
|
Quote:
BlzdLivng said:
what kind of lights are you running? If a HID you'll need a better fan to keep the area cool. I'm assuming your using either fl or cfl and in that case just about any vent fan that will work with your filter would be good. Get a fan based on what your filter requires. That is the best use of the filtration.
a 150w HPS. Also, I am going to use a small, DIY carbon filter, so I am not quite sure of what CFM that filter will require 
|
Zippy
Needlepoint
Registered: 06/04/09
Posts: 750
Loc: Santa Cruz
Last seen: 14 years, 11 months
|
Re: Need some help with what exhaust fan to get [Re: erikm]
#274590 - 09/02/09 09:56 PM (15 years, 3 months ago) |
|
|
CFM is cubic feet per minute, ie a 12 cfm fan would replace all the air in your grow space every minute... for every minute you left it on.
With a space that small, you shouldn't expect to need a powerful fan. A 150 watt HPS will get pretty hot, but a normal shop fan would cancel that out pretty easily.
--------------------
Even a fish could stay out of trouble if he learned to keep his mouth shut.
Indoor Floro Troublemaker/ Troublemaker x WW grow
Indoor 1000w HPS Soil Grow- *updated*
|
supersiege
Strangerer
Registered: 07/26/09
Posts: 110
Last seen: 9 years, 9 months
|
Re: Need some help with what exhaust fan to get [Re: Zippy]
#274807 - 09/03/09 02:16 AM (15 years, 3 months ago) |
|
|
formula is wrong in order to exchange the air 3 times per min u need 36 cfm...
a 4 cfm fan would need 3 mins just to exchange 12 cubic feet once
|
erikm
Stranger
Registered: 07/02/09
Posts: 81
Last seen: 11 years, 6 months
|
Re: Need some help with what exhaust fan to get [Re: supersiege]
#274926 - 09/03/09 02:13 PM (15 years, 3 months ago) |
|
|
Alright, so I realize a only need a small fan for exhaust, but how many CFM's should it have when you throw on a small carbon filter?
|
 Dr. Penguin
Registered: 05/19/08
Posts: 1,036
|
Re: Need some help with what exhaust fan to get [Re: erikm]
#275208 - 09/04/09 12:50 PM (15 years, 3 months ago) |
|
|
Inane, duplicate thread will not be tolerated. Please refer to one of you TWO other posts to get the answer to this question.
Here, I'll even link you to one...
https://www.growery.org/forums/showflat.php/Number/269971/page/1
|
Dr. Penguin
Registered: 05/19/08
Posts: 1,036
|
Re: Need some help with what exaust fan to get [Re: erikm]
#275209 - 09/04/09 12:50 PM (15 years, 3 months ago) |
|
|
 This thread has been closed.
Reason:
.
|
|
Threaded
Previous
Index
Next
Edit 
Reply 
